how to write a dissertation abstract example

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings? In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

• when submitting articles to journals, especially online journals
• when applying for research grants
• when writing a book proposal
• when completing the Ph.D. dissertation or M.A. thesis
• when writing a proposal for a conference paper
• when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

• Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
• Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
• Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
• Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
• Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

• A full citation of the source, preceding the abstract.
• The most important information first.
• The same type and style of language found in the original, including technical language.
• Key words and phrases that quickly identify the content and focus of the work.
• Clear, concise, and powerful language.

Abstracts may include:

• The thesis of the work, usually in the first sentence.
• Background information that places the work in the larger body of literature.
• The same chronological structure as the original work.

How not to write an abstract:

• Do not refer extensively to other works.
• Do not add information not contained in the original work.
• Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

Want to Get your Dissertation Accepted?

Discover how we've helped doctoral students complete their dissertations and advance their academic careers!

Join 200+ Graduated Students

Get Your Dissertation Accepted On Your Next Submission

Get customized coaching for:.

• Crafting your proposal,
• Collecting and analyzing your data, or
• Preparing your defense.

Trapped in dissertation revisions?

How to write a dissertation abstract, published by steve tippins on may 25, 2020 may 25, 2020.

Last Updated on: 3rd June 2022, 04:27 am

The abstract is where you “sell” your dissertation. In over 95% of the cases, the first thing people see will be your dissertation’s abstract. If others (such as potential employers or fellow researchers) are going to be looking at your dissertation, you have to get their interest in the abstract. 

How do you get people’s interest? Think about what you wanted to know when you were searching, and that’s what needs to be in the abstract (in addition to anything that your school requires). 

Normally dissertation abstracts are a page or less. You’ll want to include the problem you were looking at, the questions you wanted to answer, and the methodology you used. Also include what you found and what it means (the implications). For a more in-depth explanation of what to include, see the sample outline below.

Advice for Writing a Dissertation Abstract

Every word is important in a dissertation abstract. Because the space you have is so limited, you want to make sure that every word and phrase helps the reader understand what they’re going to gain when they read the entire document. On the other hand, you don’t want to put everything in the abstract because you want them to read the actual paper.

Avoid the temptation to make it more than a page long. The truth is, people aren’t going to read a multiple-page abstract, which means they won’t read your dissertation. Don’t think of it as condensing 100+ pages of material down into one page. Rather, think of it as giving an introduction to what is contained in the pages of your dissertation.

Some schools have a rubric to follow. If they do have one, follow it to the letter. This will save you time and help you please your committee more easily. There’s also usually a good reason behind the requirements they set out, so it will improve the quality of your abstract overall.

While it takes a certain artfulness to be concise, the abstract should be a relatively easy section to write. Basically, you just have to tell people what you did. You don’t need to report any new information or do anything you haven’t already done while writing your dissertation.

Dissertation Abstract Sample Outline

Traditionally, abstracts are less than a page in length, are not indented, and contain no citations. While different universities may have slightly different requirements, most want to see some variation of the following:

• Introduce the study topic and articulate the research problem.
• State the purpose of the study
• State the research method 
• Concisely describe the overall research design, methods, and data analysis procedures.
• Identify the participants.
• Present key results 
• Outline conclusions and recommendations

What Comes After Writing Your Dissertation Abstract?

Writing your dissertation abstract means you’ve completed your study. Congratulations! As you move through the final phases of getting your degree and into your new career path, you may need support navigating today’s competitive job market. 

Academic jobs are more competitive than ever, and starting your own business is best done with the guidance of someone who’s done it before. Take a look at my academic career coaching services and book a free 30-minute consultation .

If you’re still working on your dissertation, I also offer dissertation coaching and dissertation editing services.

Steve Tippins

Steve Tippins, PhD, has thrived in academia for over thirty years. He continues to love teaching in addition to coaching recent PhD graduates as well as students writing their dissertations. Learn more about his dissertation coaching and career coaching services. Book a Free Consultation with Steve Tippins

Related Posts

Dissertation

What makes a good research question.

Creating a good research question is vital to successfully completing your dissertation. Here are some tips that will help you formulate a good research question.  What Makes a Good Research Question? These are the three Read more…

Dissertation Structure

When it comes to writing a dissertation, one of the most fraught questions asked by graduate students is about dissertation structure. A dissertation is the lengthiest writing project that many graduate students ever undertake, and Read more…

Choosing a Dissertation Chair

Choosing your dissertation chair is one of the most important decisions that you’ll make in graduate school. Your dissertation chair will in many ways shape your experience as you undergo the most rigorous intellectual challenge Read more…

Make This Your Last Round of Dissertation Revision.

Learn How to Get Your Dissertation Accepted .

Discover the 5-Step Process in this Free Webinar .

Almost there!

Please verify your email address by clicking the link in the email message we just sent to your address.

If you don't see the message within the next five minutes, be sure to check your spam folder :).

Hack Your Dissertation

5-Day Mini Course: How to Finish Faster With Less Stress

Interested in more helpful tips about improving your dissertation experience? Join our 5-day mini course by email!

Dissertation Writing

Dissertation Abstract

Dissertation Abstract Writing - A Quick Guide

People also read

Dissertation Writing - Guide, Examples & Template

Dissertation vs. Thesis - Differences & Similarities

Extensive Dissertation Topic Ideas for Valuable Research

Dissertation Structure - A Complete Guide on Layout

Dissertation Proposal: Writing Guide & Examples

Easy Dissertation Examples for All Students

How to Cite a Dissertation in Different Citation Styles

Write Dissertation Introduction With Expert Tips

Many students face challenges when it comes to writing an effective dissertation abstract. They often struggle to condense their extensive research into a concise yet informative summary.

A well-crafted abstract can draw readers in, provide a clear overview of your work, and leave a lasting impression. On the other hand, a poorly written abstract may deter potential readers, making it imperative to get it right.

In this blog, we'll provide you with a comprehensive guide on how to write a dissertation abstract that not only meets the necessary academic standards but also captivates your audience. 

With expert insights and step-by-step instructions, you'll gain the skills and knowledge needed to create an abstract that stands out.

Let's dive into the art of crafting a winning dissertation abstract.

• 1. What Exactly is a Dissertation Abstract?
• 2. How to Write a Dissertation Abstract
• 3. Dissertation Abstract Sample
• 4. Tips for Writing an Effective Dissertation Abstract

What Exactly is a Dissertation Abstract?

A dissertation abstract is a concise summary that provides a snapshot of your entire dissertation . 

It's a crucial component, typically found at the beginning of your dissertation, and serves as a teaser or trailer for your research. Think of it as the first impression your work makes on your readers.

In essence, the abstract is your opportunity to convey the essence of your study in a succinct and engaging manner. It should cover the main objectives, methodology, findings, and conclusions of your research. While it might seem like a mere formality, it plays a pivotal role in the academic world and beyond.

Purpose of a Dissertation Abstract

The dissertation abstract has a distinct purpose, serving several vital roles in the academic and research world:

• Snapshot of Your Work

It acts as a concise snapshot of your entire dissertation, giving readers a quick overview of your research. This is especially useful for busy academics and researchers who want to evaluate the relevance of your work to their own studies.

• Discoverability

A well-crafted abstract includes keywords and phrases relevant to your research, making your work more discoverable in academic databases and search engines..

• Clarity and Conciseness

It challenges you to communicate your research effectively in a limited word count. This exercise encourages you to distill complex ideas into simple, clear language, promoting a deeper understanding of your work.

• Decision-Making Tool

For those deciding whether to read your full dissertation, the abstract plays a critical role. It helps readers determine if your research aligns with their interests and needs, saving them time and guiding their choices.

• Academic Significance

In academic and research circles, the abstract can act as a standalone work. Researchers often use abstracts to quickly assess the value and relevance of a study before committing to reading the entire paper.

• Professional Applications

Beyond the academic world, a dissertation abstract can also have professional implications. Potential employers and organizations often use them to assess a candidate's research abilities, critical thinking, and the potential for future contributions.

Dissertation Abstract Structure

The structure of a dissertation abstract is a critical aspect of creating an effective summary of your research. 

A well-structured abstract ensures that your readers can quickly grasp the key elements of your study. Here's a typical structure to follow:

• Introduction
• Objective or Hypothesis
• Methodology
• Key Findings
• Conclusions and Implications

Remember that while your abstract should be structured, conciseness is the key. It's a challenge to convey all of this information effectively within a limited word count. 

Each section should be using clear and straightforward language. Aim to give readers a sense of what your dissertation is about without overwhelming them with details.

How Long Should a Dissertation Abstract Be?

The ideal length of a dissertation abstract can vary depending on institutional guidelines, but a typical abstract should be concise and to the point. 

It's often recommended to keep it within the range of 150 to 300 words. While some institutions might allow slightly longer abstracts, it's crucial to remain as concise as possible. 

The goal is to provide a comprehensive summary of your research while being mindful of the limited word count. 

Paper Due? Why Suffer? That's our Job!

How to Write a Dissertation Abstract

Writing an abstract is an art that requires precision and conciseness. To create an abstract that engages readers and accurately represents your research, follow these guidelines for each section:

1. Introduce the Research Problem

Begin with a compelling introduction that clearly states the research problem or question your dissertation addresses. 

Provide context by briefly explaining the background of the study and why it's important. The introduction should draw readers in and make them want to learn more.

2.  State the Main Objective or Hypothesis

After the introduction, present the main objective or hypothesis of your research. This should be a clear and specific statement of what you intended to achieve in your study. 

This section sets the stage for what readers can expect in terms of the study's focus.

3.  Describe Your Research Methods

Provide a concise description of the research methods you used. Mention whether your research employed qualitative , quantitative , or mixed methods. 

Briefly explain the data collection techniques, sampling methods, and any analytical tools or software used. Keep it informative while being succinct so readers understand your approach.

For instance , if your thesis abstract involved surveys and data analysis, you could say:

4. Summarize Key Findings

Summarize the most significant findings of your research. Focus on the main results, trends, or discoveries that emerged from your study. 

Use quantitative data, statistics, or qualitative insights, as appropriate, to support your findings. Highlight the key takeaways that contribute to your field of study.

For example , your thesis or dissertation revealed a concerning trend, you could state: 

5.  Conclude and Discuss Implications

Conclude your abstract by summarizing the conclusions you drew from your research. Discuss the broader implications of your findings and their significance.

Answer the "so what" question – explain why your research matters, both academically and practically.

6.  Include Relevant Keywords

Include a list of relevant keywords or phrases. These are crucial for ensuring your work is discoverable in academic databases and search engines. 

Choose terms commonly used in your field and reflect the main themes of your research.

Take a look at this dissertation abstract example for a more comprehensive understanding

Tough Essay Due? Hire Tough Writers!

Dissertation Abstract Sample

The best way to understand how to write a great dissertation abstract is to look at some examples. These dissertation examples will help you understand how a good abstract is constructed.

Law Dissertation Abstract Example

Dissertation Abstract Humanities

Thesis Dissertation Abstract

Tips for Writing an Effective Dissertation Abstract

Crafting a compelling dissertation abstract is essential to grab the attention of your target audience and provide a clear overview of your research. 

Here are some valuable tips to ensure your abstract is effective:

• Clarity and Brevity : Keep your dissertation or thesis abstract clear and concise. Avoid jargon or overly technical language. 
• Focus on Key Information : Highlight the most significant aspects of your research questions. Readers should grasp the main points and relevance of your work quickly.
• Stay within Word Limit : Adhere to the word limit specified by your institution or guidelines. Typically, abstracts are limited to 150-300 words.
• Be Accurate and Honest : Ensure that your abstract accurately represents your research. Don't make exaggerated claims or overstate your findings.
• Edit and Proofread : Carefully proofread your abstract for grammar and spelling errors. A well-edited abstract demonstrates professionalism.
• Consider Your Audience : Keep in mind your target audience, whether it's academic peers, potential employers, or a general readership. Tailor your abstract to their level of understanding.
• Write in the Past Tense: Abstracts typically use past tense when referring to your research, as it has already been completed.
• Seek Feedback : Before finalizing your abstract, get feedback from peers, advisors, or writing experts. Their insights can help refine your content.

In conclusion, the dissertation abstract serves as a powerful gateway in the world of academia. It's the gateway to your research, the lens through which your work is viewed by others. 

By following a structured approach, focusing on key elements, and adhering to word limits, you can write a dissertation abstract that stands out.

Ready to create an outstanding dissertation abstract that leaves a lasting impression? Get in touch with our dissertation writing service for expert guidance.

Our online paper writing service has a team of highly qualified writers for all subjects. We can assist you at every step, from formulating a research question to writing a draft and ensuring accurate formatting and citations. 

Simply reach out to us and get excellent custom dissertation writing help!

Write Essay Within 60 Seconds!

Cathy has been been working as an author on our platform for over five years now. She has a Masters degree in mass communication and is well-versed in the art of writing. Cathy is a professional who takes her work seriously and is widely appreciated by clients for her excellent writing skills.

Paper Due? Why Suffer? That’s our Job!

Keep reading

How to Write an Abstract APA Format

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

An APA abstract is a brief, comprehensive summary of the contents of an article, research paper, dissertation, or report.

It is written in accordance with the guidelines of the American Psychological Association (APA), which is a widely used format in social and behavioral sciences. 

An APA abstract summarizes, usually in one paragraph of between 150–250 words, the major aspects of a research paper or dissertation in a prescribed sequence that includes:

• The rationale: the overall purpose of the study, providing a clear context for the research undertaken.
• Information regarding the method and participants: including materials/instruments, design, procedure, and data analysis.
• Main findings or trends: effectively highlighting the key outcomes of the hypotheses.
• Interpretations and conclusion(s): solidify the implications of the research.
• Keywords related to the study: assist the paper’s discoverability in academic databases.

The abstract should stand alone, be “self-contained,” and make sense to the reader in isolation from the main article.

The purpose of the abstract is to give the reader a quick overview of the essential information before reading the entire article. The abstract is placed on its own page, directly after the title page and before the main body of the paper.

Although the abstract will appear as the very first part of your paper, it’s good practice to write your abstract after you’ve drafted your full paper, so that you know what you’re summarizing.

Note : This page reflects the latest version of the APA Publication Manual (i.e., APA 7), released in October 2019.

Structure of the Abstract

[NOTE: DO NOT separate the components of the abstract – it should be written as a single paragraph. This section is separated to illustrate the abstract’s structure.]

1) The Rationale

One or two sentences describing the overall purpose of the study and the research problem(s) you investigated. You are basically justifying why this study was conducted.

• What is the importance of the research?
• Why would a reader be interested in the larger work?
• For example, are you filling a gap in previous research or applying new methods to take a fresh look at existing ideas or data?
• Women who are diagnosed with breast cancer can experience an array of psychosocial difficulties; however, social support, particularly from a spouse, has been shown to have a protective function during this time. This study examined the ways in which a woman’s daily mood, pain, and fatigue, and her spouse’s marital satisfaction predict the woman’s report of partner support in the context of breast cancer.
• The current nursing shortage, high hospital nurse job dissatisfaction, and reports of uneven quality of hospital care are not uniquely American phenomena.
• Students with special educational needs and disabilities (SEND) are more likely to exhibit behavioral difficulties than their typically developing peers. The aim of this study was to identify specific risk factors that influence variability in behavior difficulties among individuals with SEND.

2) The Method

Information regarding the participants (number, and population). One or two sentences outlining the method, explaining what was done and how. The method is described in the present tense.

• Pretest data from a larger intervention study and multilevel modeling were used to examine the effects of women’s daily mood, pain, and fatigue and average levels of mood, pain, and fatigue on women’s report of social support received from her partner, as well as how the effects of mood interacted with partners’ marital satisfaction.
• This paper presents reports from 43,000 nurses from more than 700 hospitals in the United States, Canada, England, Scotland, and Germany in 1998–1999.
• The study sample comprised 4,228 students with SEND, aged 5–15, drawn from 305 primary and secondary schools across England. Explanatory variables were measured at the individual and school levels at baseline, along with a teacher-reported measure of behavior difficulties (assessed at baseline and the 18-month follow-up).

3) The Results

One or two sentences indicating the main findings or trends found as a result of your analysis. The results are described in the present or past tense.

• Results show that on days in which women reported higher levels of negative or positive mood, as well as on days they reported more pain and fatigue, they reported receiving more support. Women who, on average, reported higher levels of positive mood tended to report receiving more support than those who, on average, reported lower positive mood. However, average levels of negative mood were not associated with support. Higher average levels of fatigue but not pain were associated with higher support. Finally, women whose husbands reported higher levels of marital satisfaction reported receiving more partner support, but husbands’ marital satisfaction did not moderate the effect of women’s mood on support.
• Nurses in countries with distinctly different healthcare systems report similar shortcomings in their work environments and the quality of hospital care. While the competence of and relation between nurses and physicians appear satisfactory, core problems in work design and workforce management threaten the provision of care.
• Hierarchical linear modeling of data revealed that differences between schools accounted for between 13% (secondary) and 15.4% (primary) of the total variance in the development of students’ behavior difficulties, with the remainder attributable to individual differences. Statistically significant risk markers for these problems across both phases of education were being male, eligibility for free school meals, being identified as a bully, and lower academic achievement. Additional risk markers specific to each phase of education at the individual and school levels are also acknowledged.

4) The Conclusion / Implications

A brief summary of your conclusions and implications of the results, described in the present tense. Explain the results and why the study is important to the reader.

• For example, what changes should be implemented as a result of the findings of the work?
• How does this work add to the body of knowledge on the topic?

Implications of these findings are discussed relative to assisting couples during this difficult time in their lives.

• Resolving these issues, which are amenable to managerial intervention, is essential to preserving patient safety and care of consistently high quality.
• Behavior difficulties are affected by risks across multiple ecological levels. Addressing any one of these potential influences is therefore likely to contribute to the reduction in the problems displayed.

The above examples of abstracts are from the following papers:

Aiken, L. H., Clarke, S. P., Sloane, D. M., Sochalski, J. A., Busse, R., Clarke, H., … & Shamian, J. (2001). Nurses’ reports on hospital care in five countries . Health affairs, 20(3) , 43-53.

Boeding, S. E., Pukay-Martin, N. D., Baucom, D. H., Porter, L. S., Kirby, J. S., Gremore, T. M., & Keefe, F. J. (2014). Couples and breast cancer: Women’s mood and partners’ marital satisfaction predicting support perception . Journal of Family Psychology, 28(5) , 675.

Oldfield, J., Humphrey, N., & Hebron, J. (2017). Risk factors in the development of behavior difficulties among students with special educational needs and disabilities: A multilevel analysis . British journal of educational psychology, 87(2) , 146-169.

5) Keywords

APA style suggests including a list of keywords at the end of the abstract. This is particularly common in academic articles and helps other researchers find your work in databases.

Keywords in an abstract should be selected to help other researchers find your work when searching an online database. These keywords should effectively represent the main topics of your study. Here are some tips for choosing keywords:

Core Concepts: Identify the most important ideas or concepts in your paper. These often include your main research topic, the methods you’ve used, or the theories you’re discussing.

Specificity: Your keywords should be specific to your research. For example, suppose your paper is about the effects of climate change on bird migration patterns in a specific region. In that case, your keywords might include “climate change,” “bird migration,” and the region’s name.

Consistency with Paper: Make sure your keywords are consistent with the terms you’ve used in your paper. For example, if you use the term “adolescent” rather than “teen” in your paper, choose “adolescent” as your keyword, not “teen.”

Jargon and Acronyms: Avoid using too much-specialized jargon or acronyms in your keywords, as these might not be understood or used by all researchers in your field.

Synonyms: Consider including synonyms of your keywords to capture as many relevant searches as possible. For example, if your paper discusses “post-traumatic stress disorder,” you might include “PTSD” as a keyword.

Remember, keywords are a tool for others to find your work, so think about what terms other researchers might use when searching for papers on your topic.

The Abstract SHOULD NOT contain:

Lengthy background or contextual information: The abstract should focus on your research and findings, not general topic background.

Undefined jargon, abbreviations,  or acronyms: The abstract should be accessible to a wide audience, so avoid highly specialized terms without defining them.

Citations: Abstracts typically do not include citations, as they summarize original research.

Incomplete sentences or bulleted lists: The abstract should be a single, coherent paragraph written in complete sentences.

New information not covered in the paper: The abstract should only summarize the paper’s content.

Subjective comments or value judgments: Stick to objective descriptions of your research.

Excessive details on methods or procedures: Keep descriptions of methods brief and focused on main steps.

Speculative or inconclusive statements: The abstract should state the research’s clear findings, not hypotheses or possible interpretations.

• Any illustration, figure, table, or references to them . All visual aids, data, or extensive details should be included in the main body of your paper, not in the abstract. 
• Elliptical or incomplete sentences should be avoided in an abstract . The use of ellipses (…), which could indicate incomplete thoughts or omitted text, is not appropriate in an abstract.

APA Style for Abstracts

An APA abstract must be formatted as follows:

Include the running head aligned to the left at the top of the page (professional papers only) and page number. Note, student papers do not require a running head. On the first line, center the heading “Abstract” and bold (do not underlined or italicize). Do not indent the single abstract paragraph (which begins one line below the section title). Double-space the text. Use Times New Roman font in 12 pt. Set one-inch (or 2.54 cm) margins. If you include a “keywords” section at the end of the abstract, indent the first line and italicize the word “Keywords” while leaving the keywords themselves without any formatting.

Example APA Abstract Page

Download this example as a PDF

Further Information

• APA 7th Edition Abstract and Keywords Guide
• Example APA Abstract
• How to Write a Good Abstract for a Scientific Paper or Conference Presentation
• How to Write a Lab Report
• Writing an APA paper

How long should an APA abstract be?

An APA abstract should typically be between 150 to 250 words long. However, the exact length may vary depending on specific publication or assignment guidelines. It is crucial that it succinctly summarizes the essential elements of the work, including purpose, methods, findings, and conclusions.

Where does the abstract go in an APA paper?

In an APA formatted paper, the abstract is placed on its own page, directly after the title page and before the main body of the paper. It’s typically the second page of the document. It starts with the word “Abstract” (centered and not in bold) at the top of the page, followed by the text of the abstract itself.

What are the 4 C’s of abstract writing?

The 4 C’s of abstract writing are an approach to help you create a well-structured and informative abstract. They are:

Conciseness: An abstract should briefly summarize the key points of your study. Stick to the word limit (typically between 150-250 words for an APA abstract) and avoid unnecessary details.

Clarity: Your abstract should be easy to understand. Avoid jargon and complex sentences. Clearly explain the purpose, methods, results, and conclusions of your study.

Completeness: Even though it’s brief, the abstract should provide a complete overview of your study, including the purpose, methods, key findings, and your interpretation of the results.

Cohesion: The abstract should flow logically from one point to the next, maintaining a coherent narrative about your study. It’s not just a list of disjointed elements; it’s a brief story of your research from start to finish.

What is the abstract of a psychology paper?

An abstract in a psychology paper serves as a snapshot of the paper, allowing readers to quickly understand the purpose, methodology, results, and implications of the research without reading the entire paper. It is generally between 150-250 words long.

• HOW WE WORK
• THESIS WRITING
• DISSERTATION PROCESS

Steps Guide to Create Dissertation Abstract With Examples

Home >> Blog >> Steps Guide to Create Dissertation Abstract With Examples

An abstract summarizes your entire dissertation, typically ranging from 200-350 words. It should provide a clear overview of your project and highlight the main points of your argument. To write an effective abstract, you'll need to be concise and organized while still presenting your ideas clearly and coherently.

If you're a student working on a dissertation, you know that writing the abstract can be one of the most challenging parts. But don't worry, we're here to help!

In this blog post, we'll give you a step-by-step guide to creating your dissertation abstract and some examples to help you get started. So read on and start writing an abstract that will make your professors proud!

What is a Dissertation Abstract?

How to write a good dissertation abstract, dissertation abstract example, tips to write a strong dissertation abstract.

‘What is abstract in dissertation writing?’

The abstract is designed to quickly summarize your dissertation in an engaging way. It aims to show readers what they can expect from reading it more thoroughly later on. It is an important part of dissertation writing and must be written carefully.

The abstract is a short and concise way of getting your research paper's message across. It should summarize the entire work in one paragraph, so it can be easily understood by readers who are not familiar with what it is about!

It should be included before the table of contents and after the title page and acknowledgments.

‘What should dissertation abstract include?’

Ideally, a dissertation or thesis abstract should include the following things;

• The study's and research's goal.
• Your dissertation's research methods.
• The key findings and results.
• The implications of the obtained results.

A good abstract discusses all these points. It is written in the present simple tense.

What is the Main Purpose of an Abstract?

The first purpose of an abstract is to capture the attention of potential readers before they read the rest of your work. It should specifically communicate what you were attempting to discover and how this research was conducted so that anyone interested can decide whether or not they want more information on that topic.

The abstract provides brief background information and introduces your work to the readers. It helps readers in deciding whether or not to continue reading your work. It should be included in all research projects and case studies, just like a literature review.

Dissertation Abstract Structure

Here are the sections that must be included in a dissertation abstract format.

• Introduction
• Aims and objectives
• Results and discussion

Dissertation Abstract Length

It varies depending on which college/university you attend. Some universities require that you summarize your study in one paragraph, while others ask for about 300-500 words.

Dissertation abstract word count varies based on different colleges’ policies, so be sure to check yours before writing it.

(back to top)

Here are the easy steps to write a good dissertation abstract.

• 1. Explain the Research Purpose

Explain everything briefly and describe the significance of your research work. State the purpose and significance of your research and what the reader can learn from reading your paper.

The following are the components of an abstract:

• Your research objectives and questions.
• The significance of these research questions.

You must make this section extremely clear to capture your reader's attention and interest. This is where you'll "hook" them with a compelling introduction that will capture their attention in reading more about the project.

They might lose patience if we don't put in the effort from start to finish.

• 2. Describe Research Methodology

Describe how you responded to the research questions. This means that you will present the methodology and design of your research in this paragraph. It could be qualitative or quantitative in nature. Mention it whatever it is for your reader.

However, keep it brief and avoid providing all of the details here.

• 3. State Research’s Main Findings

This section contains the most important findings from your research. It should be concise and clear to readers about what you discovered, without padding it with unnecessary information or repeating things that have already been covered.

Remember to be concise and clear when summarizing the most important aspects of your study, namely answers to its original questions.

• 4. Discuss the Research Implications

Have you ever found yourself struggling to grasp the big picture while reading a lengthy paper? That is why we have implications. It explains what those numbers and findings mean in our daily lives as citizens and readers.

The following are the topics that should be discussed here.

• The significance of your research.
• The significance and impact of your research findings.
• Future research possibilities

Ensure that these elements are included in your abstract.

Here is a dissertation abstract sample PDF for your better understanding.

Thesis Introduction Chapter Sample

Here are the tips for writing a good and engaging abstract for your dissertation.

• Recognize the purpose of writing an abstract.
• Create an abstract after writing the entire dissertation.
• Explain each chapter in one to two lines before writing the abstract.
• Examine some abstract examples to gain a better understanding of them.
• Write clearly and avoid using overly complicated language.
• Concentrate on your personal research.
• Make an effort to keep everything concise and to the point.
• Keep the details for the main sections and don't include everything here.
• When you have finished writing your thesis abstract, it is time to read it and remove any errors thoroughly.

You can save time and effort by using these simple tips to write your dissertation abstract correctly. If you still require assistance, contact us at GradSchoolGenius for help! We are professionals who want nothing more than the best possible outcomes for students; they’ll be happy to assist with anything to get you a perfect paper.

Frequently Asked Questions

What is the difference between an abstract and an introduction.

An abstract is less than a page long, whereas an introduction is much longer. The introduction chapter is quite detailed, as it introduces the readers to each important and interesting detail. An abstract is unique in that it is used to capture the reader's interest.

How long should an abstract be for a 10000 word dissertation?

If you are writing a 10000-word dissertation, abstracts are typically about 300-350 words long. This is because it contains all the information necessary to understand what your paper is about.

What are the 5 parts of an abstract?

Here are 5 parts of an abstract:

• Research significance
• Methodology

Similar Blogs

• Dissertation Introduction
• Dissertation Topics
• Thesis Introduction
• Thesis Topics
• Thesis Format

GradSchoolGenius is a top-ranked academic writing service. We are home to high-quality academic thesis and dissertations for graduate and post-graduate students worldwide.

• 100% Plagiarism-free Work
• 100% Deadline Driven
• 100% Confidentiality
• 100% Money-back Guarantee
• 15+ Years of Experience
• 500+ Happy Clients
• 500+ Projects Completed
• 24/7 Customer Support

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 397 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message
• Any additional findings of importance
• Implications for future studies 

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

(Adapted from: http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3136027/ )

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation

What Is a Dissertation? | Guide, Examples, & Template

A dissertation is a long-form piece of academic writing based on original research conducted by you. It is usually submitted as the final step in order to finish a PhD program.

Your dissertation is probably the longest piece of writing you’ve ever completed. It requires solid research, writing, and analysis skills, and it can be intimidating to know where to begin.

Your department likely has guidelines related to how your dissertation should be structured. When in doubt, consult with your supervisor.

You can also download our full dissertation template in the format of your choice below. The template includes a ready-made table of contents with notes on what to include in each chapter, easily adaptable to your department’s requirements.

Download Word template Download Google Docs template

• In the US, a dissertation generally refers to the collection of research you conducted to obtain a PhD.
• In other countries (such as the UK), a dissertation often refers to the research you conduct to obtain your bachelor’s or master’s degree.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Dissertation committee and prospectus process, how to write and structure a dissertation, acknowledgements or preface, list of figures and tables, list of abbreviations, introduction, literature review, methodology, reference list, proofreading and editing, defending your dissertation, free checklist and lecture slides.

When you’ve finished your coursework, as well as any comprehensive exams or other requirements, you advance to “ABD” (All But Dissertation) status. This means you’ve completed everything except your dissertation.

Prior to starting to write, you must form your committee and write your prospectus or proposal . Your committee comprises your adviser and a few other faculty members. They can be from your own department, or, if your work is more interdisciplinary, from other departments. Your committee will guide you through the dissertation process, and ultimately decide whether you pass your dissertation defense and receive your PhD.

Your prospectus is a formal document presented to your committee, usually orally in a defense, outlining your research aims and objectives and showing why your topic is relevant . After passing your prospectus defense, you’re ready to start your research and writing.

Prevent plagiarism. Run a free check.

The structure of your dissertation depends on a variety of factors, such as your discipline, topic, and approach. Dissertations in the humanities are often structured more like a long essay , building an overall argument to support a central thesis , with chapters organized around different themes or case studies.

However, hard science and social science dissertations typically include a review of existing works, a methodology section, an analysis of your original research, and a presentation of your results , presented in different chapters.

Dissertation examples

We’ve compiled a list of dissertation examples to help you get started.

• Example dissertation #1: Heat, Wildfire and Energy Demand: An Examination of Residential Buildings and Community Equity (a dissertation by C. A. Antonopoulos about the impact of extreme heat and wildfire on residential buildings and occupant exposure risks).
• Example dissertation #2: Exploring Income Volatility and Financial Health Among Middle-Income Households (a dissertation by M. Addo about income volatility and declining economic security among middle-income households).
• Example dissertation #3: The Use of Mindfulness Meditation to Increase the Efficacy of Mirror Visual Feedback for Reducing Phantom Limb Pain in Amputees (a dissertation by N. S. Mills about the effect of mindfulness-based interventions on the relationship between mirror visual feedback and the pain level in amputees with phantom limb pain).

The very first page of your document contains your dissertation title, your name, department, institution, degree program, and submission date. Sometimes it also includes your student number, your supervisor’s name, and the university’s logo.

Read more about title pages

The acknowledgements section is usually optional and gives space for you to thank everyone who helped you in writing your dissertation. This might include your supervisors, participants in your research, and friends or family who supported you. In some cases, your acknowledgements are part of a preface.

Read more about acknowledgements Read more about prefaces

The abstract is a short summary of your dissertation, usually about 150 to 300 words long. Though this may seem very short, it’s one of the most important parts of your dissertation, because it introduces your work to your audience.

Your abstract should:

• State your main topic and the aims of your research
• Describe your methods
• Summarize your main results
• State your conclusions

Read more about abstracts

The table of contents lists all of your chapters, along with corresponding subheadings and page numbers. This gives your reader an overview of your structure and helps them easily navigate your document.

Remember to include all main parts of your dissertation in your table of contents, even the appendices. It’s easy to generate a table automatically in Word if you used heading styles. Generally speaking, you only include level 2 and level 3 headings, not every subheading you included in your finished work.

Read more about tables of contents

While not usually mandatory, it’s nice to include a list of figures and tables to help guide your reader if you have used a lot of these in your dissertation. It’s easy to generate one of these in Word using the Insert Caption feature.

Read more about lists of figures and tables

Similarly, if you have used a lot of abbreviations (especially industry-specific ones) in your dissertation, you can include them in an alphabetized list of abbreviations so that the reader can easily look up their meanings.

Read more about lists of abbreviations

In addition to the list of abbreviations, if you find yourself using a lot of highly specialized terms that you worry will not be familiar to your reader, consider including a glossary. Here, alphabetize the terms and include a brief description or definition.

Read more about glossaries

The introduction serves to set up your dissertation’s topic, purpose, and relevance. It tells the reader what to expect in the rest of your dissertation. The introduction should:

• Establish your research topic , giving the background information needed to contextualize your work
• Narrow down the focus and define the scope of your research
• Discuss the state of existing research on the topic, showing your work’s relevance to a broader problem or debate
• Clearly state your research questions and objectives
• Outline the flow of the rest of your work

Everything in the introduction should be clear, engaging, and relevant. By the end, the reader should understand the what, why, and how of your research.

Read more about introductions

A formative part of your research is your literature review . This helps you gain a thorough understanding of the academic work that already exists on your topic.

Literature reviews encompass:

• Finding relevant sources (e.g., books and journal articles)
• Assessing the credibility of your sources
• Critically analyzing and evaluating each source
• Drawing connections between them (e.g., themes, patterns, conflicts, or gaps) to strengthen your overall point

A literature review is not merely a summary of existing sources. Your literature review should have a coherent structure and argument that leads to a clear justification for your own research. It may aim to:

• Address a gap in the literature or build on existing knowledge
• Take a new theoretical or methodological approach to your topic
• Propose a solution to an unresolved problem or advance one side of a theoretical debate

Read more about literature reviews

Theoretical framework

Your literature review can often form the basis for your theoretical framework. Here, you define and analyze the key theories, concepts, and models that frame your research.

Read more about theoretical frameworks

Your methodology chapter describes how you conducted your research, allowing your reader to critically assess its credibility. Your methodology section should accurately report what you did, as well as convince your reader that this was the best way to answer your research question.

A methodology section should generally include:

• The overall research approach ( quantitative vs. qualitative ) and research methods (e.g., a longitudinal study )
• Your data collection methods (e.g., interviews or a controlled experiment )
• Details of where, when, and with whom the research took place
• Any tools and materials you used (e.g., computer programs, lab equipment)
• Your data analysis methods (e.g., statistical analysis , discourse analysis )
• An evaluation or justification of your methods

Read more about methodology sections

Your results section should highlight what your methodology discovered. You can structure this section around sub-questions, hypotheses , or themes, but avoid including any subjective or speculative interpretation here.

Your results section should:

• Concisely state each relevant result together with relevant descriptive statistics (e.g., mean , standard deviation ) and inferential statistics (e.g., test statistics , p values )
• Briefly state how the result relates to the question or whether the hypothesis was supported
• Report all results that are relevant to your research questions , including any that did not meet your expectations.

Additional data (including raw numbers, full questionnaires, or interview transcripts) can be included as an appendix. You can include tables and figures, but only if they help the reader better understand your results. Read more about results sections

Your discussion section is your opportunity to explore the meaning and implications of your results in relation to your research question. Here, interpret your results in detail, discussing whether they met your expectations and how well they fit with the framework that you built in earlier chapters. Refer back to relevant source material to show how your results fit within existing research in your field.

Some guiding questions include:

• What do your results mean?
• Why do your results matter?
• What limitations do the results have?

If any of the results were unexpected, offer explanations for why this might be. It’s a good idea to consider alternative interpretations of your data.

Read more about discussion sections

Your dissertation’s conclusion should concisely answer your main research question, leaving your reader with a clear understanding of your central argument and emphasizing what your research has contributed to the field.

In some disciplines, the conclusion is just a short section preceding the discussion section, but in other contexts, it is the final chapter of your work. Here, you wrap up your dissertation with a final reflection on what you found, with recommendations for future research and concluding remarks.

It’s important to leave the reader with a clear impression of why your research matters. What have you added to what was already known? Why is your research necessary for the future of your field?

Read more about conclusions

It is crucial to include a reference list or list of works cited with the full details of all the sources that you used, in order to avoid plagiarism. Be sure to choose one citation style and follow it consistently throughout your dissertation. Each style has strict and specific formatting requirements.

Common styles include MLA , Chicago , and APA , but which style you use is often set by your department or your field.

Create APA citations Create MLA citations

Your dissertation should contain only essential information that directly contributes to answering your research question. Documents such as interview transcripts or survey questions can be added as appendices, rather than adding them to the main body.

Read more about appendices

Making sure that all of your sections are in the right place is only the first step to a well-written dissertation. Don’t forget to leave plenty of time for editing and proofreading, as grammar mistakes and sloppy spelling errors can really negatively impact your work.

Dissertations can take up to five years to write, so you will definitely want to make sure that everything is perfect before submitting. You may want to consider using a professional dissertation editing service , AI proofreader or grammar checker to make sure your final project is perfect prior to submitting.

After your written dissertation is approved, your committee will schedule a defense. Similarly to defending your prospectus, dissertation defenses are oral presentations of your work. You’ll present your dissertation, and your committee will ask you questions. Many departments allow family members, friends, and other people who are interested to join as well.

After your defense, your committee will meet, and then inform you whether you have passed. Keep in mind that defenses are usually just a formality; most committees will have resolved any serious issues with your work with you far prior to your defense, giving you ample time to fix any problems.

As you write your dissertation, you can use this simple checklist to make sure you’ve included all the essentials.

Checklist: Dissertation

My title page includes all information required by my university.

I have included acknowledgements thanking those who helped me.

My abstract provides a concise summary of the dissertation, giving the reader a clear idea of my key results or arguments.

I have created a table of contents to help the reader navigate my dissertation. It includes all chapter titles, but excludes the title page, acknowledgements, and abstract.

My introduction leads into my topic in an engaging way and shows the relevance of my research.

My introduction clearly defines the focus of my research, stating my research questions and research objectives .

My introduction includes an overview of the dissertation’s structure (reading guide).

I have conducted a literature review in which I (1) critically engage with sources, evaluating the strengths and weaknesses of existing research, (2) discuss patterns, themes, and debates in the literature, and (3) address a gap or show how my research contributes to existing research.

I have clearly outlined the theoretical framework of my research, explaining the theories and models that support my approach.

I have thoroughly described my methodology , explaining how I collected data and analyzed data.

I have concisely and objectively reported all relevant results .

I have (1) evaluated and interpreted the meaning of the results and (2) acknowledged any important limitations of the results in my discussion .

I have clearly stated the answer to my main research question in the conclusion .

I have clearly explained the implications of my conclusion, emphasizing what new insight my research has contributed.

I have provided relevant recommendations for further research or practice.

If relevant, I have included appendices with supplemental information.

I have included an in-text citation every time I use words, ideas, or information from a source.

I have listed every source in a reference list at the end of my dissertation.

I have consistently followed the rules of my chosen citation style .

I have followed all formatting guidelines provided by my university.

Congratulations!

The end is in sight—your dissertation is nearly ready to submit! Make sure it's perfectly polished with the help of a Scribbr editor.

If you’re an educator, feel free to download and adapt these slides to teach your students about structuring a dissertation.

Open Google Slides Download PowerPoint

Is this article helpful?

Other students also liked.

• How to Write a Literature Review | Guide, Examples, & Templates
• Dissertation Table of Contents in Word | Instructions & Examples
• How to Choose a Dissertation Topic | 8 Steps to Follow

More interesting articles

• Checklist: Writing a dissertation
• Dissertation & Thesis Outline | Example & Free Templates
• Dissertation Binding and Printing | Options, Tips, & Comparison
• Example of a dissertation abstract
• Figure and Table Lists | Word Instructions, Template & Examples
• How to Write a Discussion Section | Tips & Examples
• How to Write a Dissertation or Thesis Proposal
• How to Write a Results Section | Tips & Examples
• How to Write a Thesis or Dissertation Conclusion
• How to Write a Thesis or Dissertation Introduction
• How to Write an Abstract | Steps & Examples
• How to Write Recommendations in Research | Examples & Tips
• List of Abbreviations | Example, Template & Best Practices
• Operationalization | A Guide with Examples, Pros & Cons
• Prize-Winning Thesis and Dissertation Examples
• Purpose and structure of an advisory report
• Relevance of Your Dissertation Topic | Criteria & Tips
• Research Paper Appendix | Example & Templates
• Shorten your abstract or summary
• Theoretical Framework Example for a Thesis or Dissertation
• Thesis & Dissertation Acknowledgements | Tips & Examples
• Thesis & Dissertation Database Examples
• Thesis & Dissertation Title Page | Free Templates & Examples
• What is a Dissertation Preface? | Definition & Examples
• What is a Glossary? | Definition, Templates, & Examples
• What Is a Research Methodology? | Steps & Tips
• What Is a Theoretical Framework? | Guide to Organizing
• What Is a Thesis? | Ultimate Guide & Examples

"I thought AI Proofreading was useless but.."

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

Abstract Writing: A Step-by-Step Guide With Tips & Examples

Table of Contents

Introduction

Abstracts of research papers have always played an essential role in describing your research concisely and clearly to researchers and editors of journals, enticing them to continue reading. However, with the widespread availability of scientific databases, the need to write a convincing abstract is more crucial now than during the time of paper-bound manuscripts.

Abstracts serve to "sell" your research and can be compared with your "executive outline" of a resume or, rather, a formal summary of the critical aspects of your work. Also, it can be the "gist" of your study. Since most educational research is done online, it's a sign that you have a shorter time for impressing your readers, and have more competition from other abstracts that are available to be read.

The APCI (Academic Publishing and Conferences International) articulates 12 issues or points considered during the final approval process for conferences & journals and emphasises the importance of writing an abstract that checks all these boxes (12 points). Since it's the only opportunity you have to captivate your readers, you must invest time and effort in creating an abstract that accurately reflects the critical points of your research.

With that in mind, let’s head over to understand and discover the core concept and guidelines to create a substantial abstract. Also, learn how to organise the ideas or plots into an effective abstract that will be awe-inspiring to the readers you want to reach.

What is Abstract? Definition and Overview

The word "Abstract' is derived from Latin abstractus meaning "drawn off." This etymological meaning also applies to art movements as well as music, like abstract expressionism. In this context, it refers to the revealing of the artist's intention.

Based on this, you can determine the meaning of an abstract: A condensed research summary. It must be self-contained and independent of the body of the research. However, it should outline the subject, the strategies used to study the problem, and the methods implemented to attain the outcomes. The specific elements of the study differ based on the area of study; however, together, it must be a succinct summary of the entire research paper.

Abstracts are typically written at the end of the paper, even though it serves as a prologue. In general, the abstract must be in a position to:

• Describe the paper.
• Identify the problem or the issue at hand.
• Explain to the reader the research process, the results you came up with, and what conclusion you've reached using these results.
• Include keywords to guide your strategy and the content.

Furthermore, the abstract you submit should not reflect upon any of  the following elements:

• Examine, analyse or defend the paper or your opinion.
• What you want to study, achieve or discover.
• Be redundant or irrelevant.

After reading an abstract, your audience should understand the reason - what the research was about in the first place, what the study has revealed and how it can be utilised or can be used to benefit others. You can understand the importance of abstract by knowing the fact that the abstract is the most frequently read portion of any research paper. In simpler terms, it should contain all the main points of the research paper.

What is the Purpose of an Abstract?

Abstracts are typically an essential requirement for research papers; however, it's not an obligation to preserve traditional reasons without any purpose. Abstracts allow readers to scan the text to determine whether it is relevant to their research or studies. The abstract allows other researchers to decide if your research paper can provide them with some additional information. A good abstract paves the interest of the audience to pore through your entire paper to find the content or context they're searching for.

Abstract writing is essential for indexing, as well. The Digital Repository of academic papers makes use of abstracts to index the entire content of academic research papers. Like meta descriptions in the regular Google outcomes, abstracts must include keywords that help researchers locate what they seek.

Types of Abstract

Informative and Descriptive are two kinds of abstracts often used in scientific writing.

A descriptive abstract gives readers an outline of the author's main points in their study. The reader can determine if they want to stick to the research work, based on their interest in the topic. An abstract that is descriptive is similar to the contents table of books, however, the format of an abstract depicts complete sentences encapsulated in one paragraph. It is unfortunate that the abstract can't be used as a substitute for reading a piece of writing because it's just an overview, which omits readers from getting an entire view. Also, it cannot be a way to fill in the gaps the reader may have after reading this kind of abstract since it does not contain crucial information needed to evaluate the article.

To conclude, a descriptive abstract is:

• A simple summary of the task, just summarises the work, but some researchers think it is much more of an outline
• Typically, the length is approximately 100 words. It is too short when compared to an informative abstract.
• A brief explanation but doesn't provide the reader with the complete information they need;
• An overview that omits conclusions and results

An informative abstract is a comprehensive outline of the research. There are times when people rely on the abstract as an information source. And the reason is why it is crucial to provide entire data of particular research. A well-written, informative abstract could be a good substitute for the remainder of the paper on its own.

A well-written abstract typically follows a particular style. The author begins by providing the identifying information, backed by citations and other identifiers of the papers. Then, the major elements are summarised to make the reader aware of the study. It is followed by the methodology and all-important findings from the study. The conclusion then presents study results and ends the abstract with a comprehensive summary.

In a nutshell, an informative abstract:

• Has a length that can vary, based on the subject, but is not longer than 300 words.
• Contains all the content-like methods and intentions
• Offers evidence and possible recommendations.

Informative Abstracts are more frequent than descriptive abstracts because of their extensive content and linkage to the topic specifically. You should select different types of abstracts to papers based on their length: informative abstracts for extended and more complex abstracts and descriptive ones for simpler and shorter research papers.

What are the Characteristics of a Good Abstract?

• A good abstract clearly defines the goals and purposes of the study.
• It should clearly describe the research methodology with a primary focus on data gathering, processing, and subsequent analysis.
• A good abstract should provide specific research findings.
• It presents the principal conclusions of the systematic study.
• It should be concise, clear, and relevant to the field of study.
• A well-designed abstract should be unifying and coherent.
• It is easy to grasp and free of technical jargon.
• It is written impartially and objectively.

What are the various sections of an ideal Abstract?

By now, you must have gained some concrete idea of the essential elements that your abstract needs to convey . Accordingly, the information is broken down into six key sections of the abstract, which include:

An Introduction or Background

Research methodology, objectives and goals, limitations.

Let's go over them in detail.

The introduction, also known as background, is the most concise part of your abstract. Ideally, it comprises a couple of sentences. Some researchers only write one sentence to introduce their abstract. The idea behind this is to guide readers through the key factors that led to your study.

It's understandable that this information might seem difficult to explain in a couple of sentences. For example, think about the following two questions like the background of your study:

• What is currently available about the subject with respect to the paper being discussed?
• What isn't understood about this issue? (This is the subject of your research)

While writing the abstract’s introduction, make sure that it is not lengthy. Because if it crosses the word limit, it may eat up the words meant to be used for providing other key information.

Research methodology is where you describe the theories and techniques you used in your research. It is recommended that you describe what you have done and the method you used to get your thorough investigation results. Certainly, it is the second-longest paragraph in the abstract.

In the research methodology section, it is essential to mention the kind of research you conducted; for instance, qualitative research or quantitative research (this will guide your research methodology too) . If you've conducted quantitative research, your abstract should contain information like the sample size, data collection method, sampling techniques, and duration of the study. Likewise, your abstract should reflect observational data, opinions, questionnaires (especially the non-numerical data) if you work on qualitative research.

The research objectives and goals speak about what you intend to accomplish with your research. The majority of research projects focus on the long-term effects of a project, and the goals focus on the immediate, short-term outcomes of the research. It is possible to summarise both in just multiple sentences.

In stating your objectives and goals, you give readers a picture of the scope of the study, its depth and the direction your research ultimately follows. Your readers can evaluate the results of your research against the goals and stated objectives to determine if you have achieved the goal of your research.

In the end, your readers are more attracted by the results you've obtained through your study. Therefore, you must take the time to explain each relevant result and explain how they impact your research. The results section exists as the longest in your abstract, and nothing should diminish its reach or quality.

One of the most important things you should adhere to is to spell out details and figures on the results of your research.

Instead of making a vague assertion such as, "We noticed that response rates varied greatly between respondents with high incomes and those with low incomes", Try these: "The response rate was higher for high-income respondents than those with lower incomes (59 30 percent vs. 30 percent in both cases; P<0.01)."

You're likely to encounter certain obstacles during your research. It could have been during data collection or even during conducting the sample . Whatever the issue, it's essential to inform your readers about them and their effects on the research.

Research limitations offer an opportunity to suggest further and deep research. If, for instance, you were forced to change for convenient sampling and snowball samples because of difficulties in reaching well-suited research participants, then you should mention this reason when you write your research abstract. In addition, a lack of prior studies on the subject could hinder your research.

Your conclusion should include the same number of sentences to wrap the abstract as the introduction. The majority of researchers offer an idea of the consequences of their research in this case.

Your conclusion should include three essential components:

• A significant take-home message.
• Corresponding important findings.
• The Interpretation.

Even though the conclusion of your abstract needs to be brief, it can have an enormous influence on the way that readers view your research. Therefore, make use of this section to reinforce the central message from your research. Be sure that your statements reflect the actual results and the methods you used to conduct your research.

Good Abstract Examples

Abstract example #1.

Children’s consumption behavior in response to food product placements in movies.

The abstract:

"Almost all research into the effects of brand placements on children has focused on the brand's attitudes or behavior intentions. Based on the significant differences between attitudes and behavioral intentions on one hand and actual behavior on the other hand, this study examines the impact of placements by brands on children's eating habits. Children aged 6-14 years old were shown an excerpt from the popular film Alvin and the Chipmunks and were shown places for the item Cheese Balls. Three different versions were developed with no placements, one with moderately frequent placements and the third with the highest frequency of placement. The results revealed that exposure to high-frequency places had a profound effect on snack consumption, however, there was no impact on consumer attitudes towards brands or products. The effects were not dependent on the age of the children. These findings are of major importance to researchers studying consumer behavior as well as nutrition experts as well as policy regulators."

Abstract Example #2

Social comparisons on social media: The impact of Facebook on young women’s body image concerns and mood. The abstract:

"The research conducted in this study investigated the effects of Facebook use on women's moods and body image if the effects are different from an internet-based fashion journal and if the appearance comparison tendencies moderate one or more of these effects. Participants who were female ( N = 112) were randomly allocated to spend 10 minutes exploring their Facebook account or a magazine's website or an appearance neutral control website prior to completing state assessments of body dissatisfaction, mood, and differences in appearance (weight-related and facial hair, face, and skin). Participants also completed a test of the tendency to compare appearances. The participants who used Facebook were reported to be more depressed than those who stayed on the control site. In addition, women who have the tendency to compare appearances reported more facial, hair and skin-related issues following Facebook exposure than when they were exposed to the control site. Due to its popularity it is imperative to conduct more research to understand the effect that Facebook affects the way people view themselves."

Abstract Example #3

The Relationship Between Cell Phone Use and Academic Performance in a Sample of U.S. College Students

"The cellphone is always present on campuses of colleges and is often utilised in situations in which learning takes place. The study examined the connection between the use of cell phones and the actual grades point average (GPA) after adjusting for predictors that are known to be a factor. In the end 536 students in the undergraduate program from 82 self-reported majors of an enormous, public institution were studied. Hierarchical analysis ( R 2 = .449) showed that use of mobile phones is significantly ( p < .001) and negative (b equal to -.164) connected to the actual college GPA, after taking into account factors such as demographics, self-efficacy in self-regulated learning, self-efficacy to improve academic performance, and the actual high school GPA that were all important predictors ( p < .05). Therefore, after adjusting for other known predictors increasing cell phone usage was associated with lower academic performance. While more research is required to determine the mechanisms behind these results, they suggest the need to educate teachers and students to the possible academic risks that are associated with high-frequency mobile phone usage."

Quick tips on writing a good abstract

There exists a common dilemma among early age researchers whether to write the abstract at first or last? However, it's recommended to compose your abstract when you've completed the research since you'll have all the information to give to your readers. You can, however, write a draft at the beginning of your research and add in any gaps later.

If you find abstract writing a herculean task, here are the few tips to help you with it:

1. Always develop a framework to support your abstract

Before writing, ensure you create a clear outline for your abstract. Divide it into sections and draw the primary and supporting elements in each one. You can include keywords and a few sentences that convey the essence of your message.

2. Review Other Abstracts

Abstracts are among the most frequently used research documents, and thousands of them were written in the past. Therefore, prior to writing yours, take a look at some examples from other abstracts. There are plenty of examples of abstracts for dissertations in the dissertation and thesis databases.

3. Avoid Jargon To the Maximum

When you write your abstract, focus on simplicity over formality. You should  write in simple language, and avoid excessive filler words or ambiguous sentences. Keep in mind that your abstract must be readable to those who aren't acquainted with your subject.

4. Focus on Your Research

It's a given fact that the abstract you write should be about your research and the findings you've made. It is not the right time to mention secondary and primary data sources unless it's absolutely required.

Conclusion: How to Structure an Interesting Abstract?

Abstracts are a short outline of your essay. However, it's among the most important, if not the most important. The process of writing an abstract is not straightforward. A few early-age researchers tend to begin by writing it, thinking they are doing it to "tease" the next step (the document itself). However, it is better to treat it as a spoiler.

The simple, concise style of the abstract lends itself to a well-written and well-investigated study. If your research paper doesn't provide definitive results, or the goal of your research is questioned, so will the abstract. Thus, only write your abstract after witnessing your findings and put your findings in the context of a larger scenario.

The process of writing an abstract can be daunting, but with these guidelines, you will succeed. The most efficient method of writing an excellent abstract is to centre the primary points of your abstract, including the research question and goals methods, as well as key results.

Interested in learning more about dedicated research solutions? Go to the SciSpace product page to find out how our suite of products can help you simplify your research workflows so you can focus on advancing science.

The best-in-class solution is equipped with features such as literature search and discovery, profile management, research writing and formatting, and so much more.

But before you go,

You might also like.

Consensus GPT vs. SciSpace GPT: Choose the Best GPT for Research

Literature Review and Theoretical Framework: Understanding the Differences

Types of Essays in Academic Writing - Quick Guide (2024)

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation

How to Write a Dissertation | A Guide to Structure & Content

A dissertation or thesis is a long piece of academic writing based on original research, submitted as part of an undergraduate or postgraduate degree.

The structure of a dissertation depends on your field, but it is usually divided into at least four or five chapters (including an introduction and conclusion chapter).

The most common dissertation structure in the sciences and social sciences includes:

• An introduction to your topic
• A literature review that surveys relevant sources
• An explanation of your methodology
• An overview of the results of your research
• A discussion of the results and their implications
• A conclusion that shows what your research has contributed

Dissertations in the humanities are often structured more like a long essay , building an argument by analysing primary and secondary sources . Instead of the standard structure outlined here, you might organise your chapters around different themes or case studies.

Other important elements of the dissertation include the title page , abstract , and reference list . If in doubt about how your dissertation should be structured, always check your department’s guidelines and consult with your supervisor.

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Acknowledgements, table of contents, list of figures and tables, list of abbreviations, introduction, literature review / theoretical framework, methodology, reference list.

The very first page of your document contains your dissertation’s title, your name, department, institution, degree program, and submission date. Sometimes it also includes your student number, your supervisor’s name, and the university’s logo. Many programs have strict requirements for formatting the dissertation title page .

The title page is often used as cover when printing and binding your dissertation .

Prevent plagiarism, run a free check.

The acknowledgements section is usually optional, and gives space for you to thank everyone who helped you in writing your dissertation. This might include your supervisors, participants in your research, and friends or family who supported you.

The abstract is a short summary of your dissertation, usually about 150-300 words long. You should write it at the very end, when you’ve completed the rest of the dissertation. In the abstract, make sure to:

• State the main topic and aims of your research
• Describe the methods you used
• Summarise the main results
• State your conclusions

Although the abstract is very short, it’s the first part (and sometimes the only part) of your dissertation that people will read, so it’s important that you get it right. If you’re struggling to write a strong abstract, read our guide on how to write an abstract .

In the table of contents, list all of your chapters and subheadings and their page numbers. The dissertation contents page gives the reader an overview of your structure and helps easily navigate the document.

All parts of your dissertation should be included in the table of contents, including the appendices. You can generate a table of contents automatically in Word.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

If you have used a lot of tables and figures in your dissertation, you should itemise them in a numbered list . You can automatically generate this list using the Insert Caption feature in Word.

If you have used a lot of abbreviations in your dissertation, you can include them in an alphabetised list of abbreviations so that the reader can easily look up their meanings.

If you have used a lot of highly specialised terms that will not be familiar to your reader, it might be a good idea to include a glossary . List the terms alphabetically and explain each term with a brief description or definition.

In the introduction, you set up your dissertation’s topic, purpose, and relevance, and tell the reader what to expect in the rest of the dissertation. The introduction should:

• Establish your research topic , giving necessary background information to contextualise your work
• Narrow down the focus and define the scope of the research
• Discuss the state of existing research on the topic, showing your work’s relevance to a broader problem or debate
• Clearly state your objectives and research questions , and indicate how you will answer them
• Give an overview of your dissertation’s structure

Everything in the introduction should be clear, engaging, and relevant to your research. By the end, the reader should understand the what , why and how of your research. Not sure how? Read our guide on how to write a dissertation introduction .

Before you start on your research, you should have conducted a literature review to gain a thorough understanding of the academic work that already exists on your topic. This means:

• Collecting sources (e.g. books and journal articles) and selecting the most relevant ones
• Critically evaluating and analysing each source
• Drawing connections between them (e.g. themes, patterns, conflicts, gaps) to make an overall point

In the dissertation literature review chapter or section, you shouldn’t just summarise existing studies, but develop a coherent structure and argument that leads to a clear basis or justification for your own research. For example, it might aim to show how your research:

• Addresses a gap in the literature
• Takes a new theoretical or methodological approach to the topic
• Proposes a solution to an unresolved problem
• Advances a theoretical debate
• Builds on and strengthens existing knowledge with new data

The literature review often becomes the basis for a theoretical framework , in which you define and analyse the key theories, concepts and models that frame your research. In this section you can answer descriptive research questions about the relationship between concepts or variables.

The methodology chapter or section describes how you conducted your research, allowing your reader to assess its validity. You should generally include:

• The overall approach and type of research (e.g. qualitative, quantitative, experimental, ethnographic)
• Your methods of collecting data (e.g. interviews, surveys, archives)
• Details of where, when, and with whom the research took place
• Your methods of analysing data (e.g. statistical analysis, discourse analysis)
• Tools and materials you used (e.g. computer programs, lab equipment)
• A discussion of any obstacles you faced in conducting the research and how you overcame them
• An evaluation or justification of your methods

Your aim in the methodology is to accurately report what you did, as well as convincing the reader that this was the best approach to answering your research questions or objectives.

Next, you report the results of your research . You can structure this section around sub-questions, hypotheses, or topics. Only report results that are relevant to your objectives and research questions. In some disciplines, the results section is strictly separated from the discussion, while in others the two are combined.

For example, for qualitative methods like in-depth interviews, the presentation of the data will often be woven together with discussion and analysis, while in quantitative and experimental research, the results should be presented separately before you discuss their meaning. If you’re unsure, consult with your supervisor and look at sample dissertations to find out the best structure for your research.

In the results section it can often be helpful to include tables, graphs and charts. Think carefully about how best to present your data, and don’t include tables or figures that just repeat what you have written  –  they should provide extra information or usefully visualise the results in a way that adds value to your text.

Full versions of your data (such as interview transcripts) can be included as an appendix .

The discussion  is where you explore the meaning and implications of your results in relation to your research questions. Here you should interpret the results in detail, discussing whether they met your expectations and how well they fit with the framework that you built in earlier chapters. If any of the results were unexpected, offer explanations for why this might be. It’s a good idea to consider alternative interpretations of your data and discuss any limitations that might have influenced the results.

The discussion should reference other scholarly work to show how your results fit with existing knowledge. You can also make recommendations for future research or practical action.

The dissertation conclusion should concisely answer the main research question, leaving the reader with a clear understanding of your central argument. Wrap up your dissertation with a final reflection on what you did and how you did it. The conclusion often also includes recommendations for research or practice.

In this section, it’s important to show how your findings contribute to knowledge in the field and why your research matters. What have you added to what was already known?

You must include full details of all sources that you have cited in a reference list (sometimes also called a works cited list or bibliography). It’s important to follow a consistent reference style . Each style has strict and specific requirements for how to format your sources in the reference list.

The most common styles used in UK universities are Harvard referencing and Vancouver referencing . Your department will often specify which referencing style you should use – for example, psychology students tend to use APA style , humanities students often use MHRA , and law students always use OSCOLA . M ake sure to check the requirements, and ask your supervisor if you’re unsure.

To save time creating the reference list and make sure your citations are correctly and consistently formatted, you can use our free APA Citation Generator .

Your dissertation itself should contain only essential information that directly contributes to answering your research question. Documents you have used that do not fit into the main body of your dissertation (such as interview transcripts, survey questions or tables with full figures) can be added as appendices .

Is this article helpful?

Other students also liked.

• What Is a Dissertation? | 5 Essential Questions to Get Started
• What is a Literature Review? | Guide, Template, & Examples
• How to Write a Dissertation Proposal | A Step-by-Step Guide

More interesting articles

• Checklist: Writing a dissertation
• Dissertation & Thesis Outline | Example & Free Templates
• Dissertation binding and printing
• Dissertation Table of Contents in Word | Instructions & Examples
• Dissertation title page
• Example Theoretical Framework of a Dissertation or Thesis
• Figure & Table Lists | Word Instructions, Template & Examples
• How to Choose a Dissertation Topic | 8 Steps to Follow
• How to Write a Discussion Section | Tips & Examples
• How to Write a Results Section | Tips & Examples
• How to Write a Thesis or Dissertation Conclusion
• How to Write a Thesis or Dissertation Introduction
• How to Write an Abstract | Steps & Examples
• How to Write Recommendations in Research | Examples & Tips
• List of Abbreviations | Example, Template & Best Practices
• Operationalisation | A Guide with Examples, Pros & Cons
• Prize-Winning Thesis and Dissertation Examples
• Relevance of Your Dissertation Topic | Criteria & Tips
• Research Paper Appendix | Example & Templates
• Thesis & Dissertation Acknowledgements | Tips & Examples
• Thesis & Dissertation Database Examples
• What is a Dissertation Preface? | Definition & Examples
• What is a Glossary? | Definition, Templates, & Examples
• What Is a Research Methodology? | Steps & Tips
• What is a Theoretical Framework? | A Step-by-Step Guide
• What Is a Thesis? | Ultimate Guide & Examples

How to Write a Dissertation Abstract in 2024

A dissertation or thesis abstract is a short summary outlining the purpose and scope of a dissertation or a thesis. An abstract succinctly explains the outcomes and the goal of a longer work so that the reader would know what to expect out of it.

A dissertation abstract reflects the author’s grasp of the research topic and sets the tone for the dissertation.

It is always a good idea to write your thesis abstract or the abstract for your dissertation at the very end after you’ve completed your research. However, many universities ask for an abstract before you begin work on your dissertation so as to grasp your understanding of the topic. In that case, you are expected to form an abstract based on your preliminary research and based on how you plan to carry out your research.

Table of Contents

What does a dissertation or thesis abstract include.

• An outline of the research problem and the proposed objectives
• The research methodology
• Key arguments or results
• The conclusion of the dissertation

How Long Should an Abstract be?

The length of an abstract for a dissertation might vary from university to university as well as from program to program. Ideally, the length of an abstract is between 300 words to 500 words. It is always a good idea to check the requirements a university or journal might have about the word count of the dissertation abstract before submitting it.

An abstract is often included on a separate page in a dissertation or thesis. It should come after the title page as well as the acknowledgments but should be placed before the table of contents.

When to Write an Abstract?

An abstract is always included when you are submitting a thesis, research, or a research paper or while sending a research paper to an academic journal.

In most cases, an abstract is something that you write at the very end of your research. It should not seem like an extension of your research or a disjointed portion and should be complete by itself. It should be a stand-alone piece that strokes the reader’s curiosity to read your paper. Sometimes, universities might ask for an abstract before approving your topic for a dissertation or thesis. In that case, an abstract is submitted to show that the student has a clear idea about how to go about the research.

What Should a Dissertation Abstract Include?

As an abstract reflects the quality of a larger work, it should contain 4 key components.

1. Aim of the research :

If the aim or purpose of the research is not clear from the abstract section of your dissertation, it might leave the impression that your research has nothing new to offer. So, the abstract should be able to tell the reader or the examiner about what practical or theoretical problem the research is responding to (in other words, the research question) and what outcomes you expect to derive or what is the new thing that makes your dissertation stand apart.

You can write the aim of the dissertation or thesis in your abstract after proving the context or background for the research. A detailed background is not necessary and not possible, so only the most relevant information should be included. Once the background of your study is established and the gap in the existing literature is analyzed, you should propose the objective of your study.

It is usually preferred to use the present or simple past tense while stating the objective. This is because an abstract should be as precise and concise as possible and should reflect the same kind of rigorousness and objectivity that your dissertation will have. Find below examples of how to frame an objective for your abstract based on the use of language.

2. Method of research (the research methodology) :

After the objective of the study is stated, we move on to the methods used to conduct the research. This part should be a straightforward description of the kind of research methodology that you have used (quantitative or qualitative) in one or two sentences.

If the full thesis or dissertation is submitted, then the methodology is usually written in the simple past tense as it indicates the past action. There is no need to explain the validity of the methodology or the obstacles faced during the process in this part. Those parts only need to be included in the research methodology section of the dissertation. The goal is just to give the reader a basic insight into how you have conducted the research.

3. Outcomes of the research :

The results or the outcomes section should be included in the concluding paragraph of the abstract. This part summarizes the resolutions offered to the problem statement identified initially in the abstract. The outcome of the study should be indicated in clear terms.

Depending on the length and complexity of your research, you can decide what to include in this part. Ideally, it should not exceed 3-4 sentences. If the outcomes are complex, you could just mention the relevant ones that the reader would be able to understand without wanting further elaboration. Results are often written in the present or simple past tense.

4. The conclusion of the abstract

Particular care should be given to the way you frame the conclusion of your abstract. In this part, the main conclusions of your research should be stated. The conclusion should clearly answer the problem statement that you have proposed initially in your abstract.

The conclusion should tell the reader what your research has accomplished and what new knowledge it is adding to the existing ones. Conclusions are usually written in the simple present tense.

Keywords are added at the end of a dissertation or abstract if it is going to be published. The keyword gives the reader an idea about the essential concepts in the dissertation or thesis. They also provide visibility to your paper when others search the related words on a search engine. So, you should make sure that you add only the most important and relevant words related to your dissertation in the keywords’ section.

Example of a Dissertation Abstract

How to Structure your Dissertation or Thesis Abstract?

Abstract for the dissertation can be structured in the following way:

• As the abstract would be around 300-500 words, it is better to divide it into 2-3 paragraphs.
• More than three paragraphs might not be recommended as the abstract is of very short length.
• The aim of the research should be mentioned in the first paragraph or the introductory paragraph of the abstract.
• You should not start writing the abstract by directly stating the aim. Instead, provide background information about your area of research in 2-3 lines.
• You could even start your abstract by stating the problem statement.
• The background information on the existing literature would give the reader information about where your dissertation or thesis is situated.
• The background information or short literature review would be followed by the problem statement or vice versa according to your arguments.
• The problem statement identifies the gap in the existing literature.
• Following the problem statement, you should propose what research question you aim to answer.
• The last paragraph mentions the results or the outcomes/conclusion of the study. You could even make suggestions for future studies in this part.

Tips for writing an abstract

Writing an abstract can be challenging as you need to filter down the most relevant aspects of your dissertation into 300-500 words. This means that you will have to omit a lot of information while providing enough to interest the reader or evaluator. Here are some tips to get started on your abstract:

Tips to help you write an abstract :

• Chapter by chapter method :

List the keywords and draft a few sentences outlining the relevance of each chapter of your dissertation or thesis. The short summary of each chapter should be related to your central argument. Combine them together and fill in the gaps. Add in more information and remove the unnecessary ones as you revise the draft.

• Read other abstracts:

This is the best way to learn the conventions of abstract writing in your area of research. Notice how other well-accepted research abstracts present their ideas. Make a list of what you find interesting in those.

• Write many versions of the rough drafts:

Ultimately, it is important not to wait for the perfect version. The perfect version won’t happen unless you keep writing. Write mediocre abstracts and notice what is wrong with those versions. Write multiple versions of the abstract in different ways and work on that which you think reads the best.

• Make it compact:

Revision is an important aspect of perfecting any academic writing. Revise, change the words, and write in different ways but keep it compact. An abstract is a condensed piece of your dissertation so it should reflect that compactness.

• Keep editing:

This is one of the most important steps in writing an abstract for any academic piece. Even if you think the abstract looks perfect, come back to it after a while, and let someone else, a professional editor or a senior, have a look over it.

Let’s Conclude

So, there you go! We have outlined all the steps and tips we consider necessary before you write your dissertation . We have covered what a dissertation abstract should include, the dissertation abstract structure that you need to keep in mind, and have included tips and an example of a dissertation to help you get to it!

-Lily Brooke

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

What is a dissertation abstract and how do I write one for my PhD?

Feb 12, 2019

There are a lot of posts that talk about how to write an abstract. Most say that you should write your abstract to impress your examiner.

We say that you need to flip things upside down: sure, your examiner will read it and want to see that you’ve written it well, but you should actually have your next boss in mind when you write it.

When you apply for your first academic job, the abstract may be the only part of your thesis that your new boss will read. They may not have the time or energy to read the whole thesis, so the abstract plays a crucial role. You should write it as if you academic career depends on it.

In this guide we talk about how to write an outstanding abstract that will (hopefully) land you a job.

If you haven’t already, make sure you download our PhD Writing Template , which you can use in conjunction with this guide to supercharge your PhD.

What is an abstract?

  This is fairly straightforward stuff, but let us be clear so we are all on the same page.

An abstract is a short summary at the beginning of the PhD that sums up the research, summarises the separate sections of the thesis and outlines the contribution.

It is typically used by those wishing to get a broad understanding of a piece of research prior to reading the entire thesis.

When you apply for your first academic job, the hiring manager will take a look through applicants’ abstracts (as well as your CV and covering letter) to create a shortlist. If you are lucky enough to do well at an interview, your potential new boss will take another look through it before deciding whether to offer you the job.

Why don’t they read the whole thing? Apart from the fact that they’re way too busy to read 200+ pages, a well written abstract actually contains all they need to know. It is a way of letting them see what your research is about, what contribution it makes, what your understanding of the field is and how or whether you will fit into the department.

So, you need to write it well.

But, don’t underestimate how hard it is to write a PhD thesis abstract. You have to condense hundred of pages and years of work into a few hundred words (exactly how many will depend on your university, so double check with them before you start writing).

How do I write a good PhD abstract?

Some blog posts use keywords to summarise the content (this one does, scroll down to see them). The abstract is similar. It’s an extended set of keywords to summarise a complex piece of research.

Above all, your PhD abstract should answer the question: ‘so what’ ? In other words, what is the contribution of your thesis to the field?

If you’ve been using our PhD writing template you’ll know that, to do this, your abstract should address six questions:

• What is the reason for writing the thesis?
• What are the current approaches and gaps in the literature?
• What are your research question(s) and aims?
• Which methodology have you used?
• What are the main findings?
• What are the main conclusions and implications?

One thing that should be obvious is that you can’t write your abstract until the study itself has been written. It’ll typically be the last thing you write (alongside the acknowledgements).

But how can I write a great one?

  The tricky thing about writing a great PhD abstract is that you haven’t got much space to answer the six questions above. There are a few things to consider though that will help to elevate your writing and make your abstract as efficient as possible:

• Give a good first impression by writing in short clear sentences
• Don’t repeat the title in the abstract
• Don’t cite references
• Use keywords from the document
• Respect the word limit
• Don’t be vague – the abstract should be a self contained summary of the research, so don’t introduce ambiguous words or complex terms
• Focus on just four or five essential points, concepts, or findings. Don’t, for example, try to explain your entire theoretical framework
• Edit it carefully. Make sure every word is relevant (you haven’t got room for wasted words) and that each sentence has maximum impact
• Avoid lengthy background information
• Don’t mention anything that isn’t discussed in the thesis
• Avoid overstatements
• Don’t spin your findings, contribution or significance to make your research sound grander or more influential that it actually is

Examples of a good and bad abstract

We can see that the bad abstract fails to answer the six questions posed above. It reads more like a PhD proposal, rather than a summary of a piece of research.

Specifically:

• It doesn’t discuss the reason why the thesis was written
• It doesn’t outline the gaps in the literature
• It doesn’t outline the research questions or aims
• It doesn’t discuss the methods
• It doesn’t discuss the findings
• It doesn’t discuss the conclusions and implications of the research.

It is also too short, lacks adequate keywords and introduces unnecessary detail. The abbreviations and references only serve to confuse the reader and the claim that the thesis will ‘develop a new theory of climate change’ is both vague and over-ambitious. The reader will see through this.

The good abstract though does a much better job at answering the six questions and summarising the research.

• The reason why the thesis was written is stated: ‘We do so to better enable policy makers and academics to understand the nuances of multi-level climate governance’ and….’it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’
• The gap is clearly defined: ‘The theory has neglected to account for the role of local governments.’
• The research question are laid out: ‘We ask to what extent and in what ways local governments in the UK’…
• The methods are hinted at: ‘Using a case study…’
• The findings are summarised: ‘We show that local governments are both implementers and interpreters of policy. We also show that they make innovative contributions to and influence the direction of national policy.’
• The conclusions and implications are clear: ‘The significance of this study is that it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’

This abstract is of a much better length, and it fully summarises what the thesis is about. We can see that if someone (i.e. your hiring manager) were to read just this abstract, they’d understand what your thesis is about and the contribution that it makes.

Your PhD thesis. All on one page. 

Use our free PhD structure template to quickly visualise every element of your thesis. 

I can’t summarise my thesis, what do I do?

  We suggest you fill out our PhD Writing Template . We’ve designed it so that you can visualise your PhD on one page and easily see the main components. It’s really easy to use. It asks you a few questions related to each section of your thesis. As you answer them, you develop a synopsis. You can use that synopsis to inform your abstract. If you haven’t downloaded it, you can find it here.

  Like everything related to writing, it takes practice before you get great at writing abstracts. Follow our tips and you’ll have a head start over others.

Remember, you’re not writing your abstract for anyone other than your hiring manager. Make sure it showcases the best of your research and shows your skills as both a researcher and a writer.

If you’re struggling, send us your abstract by email and we’ll have give you free advice on how to improve it.

Hello, Doctor…

Sounds good, doesn’t it?  Be able to call yourself Doctor sooner with our five-star rated How to Write A PhD email-course. Learn everything your supervisor should have taught you about planning and completing a PhD.

Now half price. Join hundreds of other students and become a better thesis writer, or your money back. 

Share this:

Hello! I am a first year PhD student and I am interested in your Thesis writing course. However, I don’t have Paypal, thus I would like to know if there is an alternative way for you to get paid. I hope so, because I have been “following” you and I think the course can be really useful for me 🙂 Hope to hear from you soon. Best wishes, Belén Merelas

Thanks for the comment – I have sent you an email.

Hello! I am a Master’s student and I have applied for a PhD position. The professors have asked me to write a short abstract-like text, based on a brief sentence they will send me, related to the project study. How am I supposed to write a text like that when I don’t have the whole paper, the methods, results etc? Thank you in advance!

Hi Maria. I’m afraid that without knowing more about your topic or subject I am unable to give you advice on this. Sorry I can’t help in the way you may have hoped.

Thank u so much… your tips have really helped me to broaden my scope on the idea of how to write an abstract for my Ph.D. course. This is so thoughtful of you… The article is very informative and helpful…Thanks again!

I’m so pleased. Thanks for your lovely words. They’re music to my ears.

Very insightful Thanks

Glad you think so. Good luck with the writing.

Thank you so much Doc

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Search The PhD Knowledge Base

Most popular articles from the phd knowlege base.

The PhD Knowledge Base Categories

• Your PhD and Covid
• Mastering your theory and literature review chapters
• How to structure and write every chapter of the PhD
• How to stay motivated and productive
• Techniques to improve your writing and fluency
• Advice on maintaining good mental health
• Resources designed for non-native English speakers
• PhD Writing Template
• Explore our back-catalogue of motivational advice

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

Scholars often write abstracts for various applications: conference presentations may require an abstract or other short summary for a program; journal articles almost always require abstracts; invited talks and lectures are often advertised using an abstract. While the application may necessarily change the length of the abstract (a conference program may only allow for 50-75 words, for instance), the purpose and structure remains fairly constant.

Abstracts are generally kept brief (approximately 150-200 words). They differ by field, but in general, they need to summarize the article so that readers can decide if it is relevant to their work. The typical abstract includes these elements:

• A statement of the problem and objectives
• A statement of the significance of the work
• A summary of employed methods or your research approach
• A summary of findings or conclusions of the study
• A description of the implications of the findings

Regardless of field, abstract authors should explain the purpose of the work, methods used, the results and the conclusions that can be drawn. However, each field purports slightly different ways to structure the abstract. A reliable strategy is to write the abstract as a condensed version of your article, with 1-2 sentences summarizing each major section. This means that in many of the sciences and a large portion of the humanities, abstracts follow a version of the IMRAD structure: Introduction, Methods, Results, and Discussion.

Most scientific journals require authors to submit such abstracts. It is generally advisable to write the abstract in the English language. That is because most papers in other languages, especially Asian nations, tend to publish an English abstract with common search engines, such as, the MLA site.

Example Abstract

This example abstract follows the IMRAD structure closely. The first two sentences are the introduction and background information. Sentences 3-5 describe the methods used in the study. Sentence 6 summarizes the results, while the last two sentences summarize the discussion and conclusion of the study; they also indicate the significance of the results.

Usability and User-Centered Theory for 21 st Century OWLs — by Dana Lynn Driscoll, H. Allen Brizee, Michael Salvo, and Morgan Sousa from The Handbook of Research on Virtual Workplaces and the New Nature of Business Practices . Eds. Kirk St. Amant and Pavel Zemlansky. Hershey, PA: Idea Group Publishing, 2008.

This article describes results of usability research conducted on the Purdue Online Writing Lab (OWL). The Purdue OWL is an information-rich educational website that provides free writing resources to users worldwide. Researchers conducted two generations of usability tests. In the first test, participants were asked to navigate the OWL and answer questions. Results of the first test and user-centered scholarship indicated that a more user-centered focus would improve usability. The second test asked participants to answer writing-related questions using both the OWL website and a user-centered OWL prototype. Participants took significantly less time to find information using the prototype and reported a more positive response to the user-centered prototype than the original OWL. Researchers conclude that a user-centered website is more effective and can be a model for information-rich online resources. Researchers also conclude that usability research can be a productive source of ideas, underscoring the need for participatory invention.

Guide on how to pen down an abstract for a dissertation

Achieving a doctoral degree typically requires the completion of a final academic paper or dissertation. Planning this complex work involves programming practically all steps in advance, with the exception of the abstract. This discussion focuses on the methodologies for writing an effective dissertation abstract.

The abstract is the summary of the entire dissertation. Typically, its length varies from 150 to 250 words. However, depending on where you’re going to publish it, requirements could change. Thus, it’s a wise decision to ask for guidelines according to which you will orient yourself. It can be a scientific journal, professional presentation, university database, or somewhere else. 

If you have no time or inspiration, the best decision could be buying an abstract dissertation from seasoned professionals. You can visit the website Thesisgeek.com and place the order for the dissertation abstract . Your order will be elaborated immediately, and you will be matched with a suitable expert. 

Why some students do not buy dissertation abstract online

Everyone has a right to be proud of one’s doctoral degree. The feeling that you have attained it due to your engagement and hard work is indescribable. Some students prefer not to buy dissertation abstract but compose it independently. The reason for this is the fear of relying on somebody unknown. And the other reason is that in this way you admit your incapacity to write an abstract alone.

Actually, the first worry is understandable because you must find a trustworthy company. If your fear is how to find a reliable website to buy an abstract, you can follow the advice and refer to Thesisgeek.com. This company has been working in this field for many years and offers excellent services. Thus, by following the link mentioned above, you will be directed to their website where you will read about how to buy cheap dissertation abstract.

If your fear is recognising your incompetence in writing this paper, we would like to ensure that you have the wrong perception of the situation. The fact that you have already written such a complex academic piece as a dissertation underlines your skills and proficiency. So, a tiny help from external experts just saves your time and effort. 

Should i buy dissertation abstract: Steps of writing abstract 

 Why is it better sometimes to rely on skilled writers and buy abstract dissertations online?

Even if it’s not a long paper, you must apply a commitment to writing it. Take a look at the steps you should take when writing an abstract: 

Choose the type of abstract

There are three types of abstract: descriptive , informative, and critical. Thus, before you begin seeking information on where and how to buy dissertation online, you should clearly understand the type of abstract you are going to compose: 

• Descriptive: is used for short papers, and describes briefly your work. It doesn’t include such details as the conclusion and outcomes of research, but only methods and scope. 
• Informative: is used for longer papers, and includes conclusion and results, except other details.  It is more required compared to the first one.
• Critical: this type is used for expressing your critique or comments.

Consider the audience

You should think about the reader you target. So, in the case you are thinking about how to buy a purchase dissertation abstract, share the information about where you want to publish an abstract. If we are talking about a scientific community, you can use any specific terms you like. But if your reader is a common person who has no knowledge in the field of your study, you have to think better about what terms to insert. 

Four key points

Your task is to explain the importance of your abstract by covering 4 main points:

• Why did you decide to conduct this research?
• Why is it important for you, and what exactly in your research could be interesting for others?
• How it was conducted, and what outcomes you obtained.
• Why should others dedicate time and engagement to reading your work? 

All this information must be covered in your abstract. Read more about it in this pdf . Therefore, if you have no free time to dedicate to such writing, look for how to buy dissertation abstract online. 

Benefits of buying a dissertation

Writing a dissertation as well as a thesis requires much time and dedication. It’s not a descriptive essay or a story, but a weighty scientific work. Hence, every step must be pondered and programmed. Moreover, writing is a process that requires further steps before you can present your paper. Revising, editing, proofreading – you cannot miss any of these actions. 

When you buy dissertation online, you avoid plenty of mistakes and corrections to perform. Consider that people working at specialized websites, such as Thesisgeek.com, have master’s or doctoral degrees. Each of the scholars engaged in dissertation writing is skilled in a specific field that guarantees quality and professionalism. 

Buy dissertations online

It doesn’t matter if you decide to buy environmental studies dissertation abstract  or a dissertation in statistics online. What really matters is a company’s reputation. 

We strictly recommend you to check accurate reviews of customers before you refer to some websites. Pay attention to the policy posted on their home pages. Such elements as confidence and plagiarism report are significant in the case of these papers. So, choose mindfully, and you will never be disappointed. 

The editorial unit

More in Feature of the week

The Matrixyl peptide: Aging investigations

Zematopic: SOS relief for eczema sufferers

Fresh: A trending UK skincare brand

Safeguarding sight: The vital role of proper contact lens care for cosplay enthusiasts

Step into summer: The must-have heels for the 2024 wardrobe

Torcello island: Venice’s hidden gem unveiled

Unlocking joy: Exploring the magic of the purple gift card by Park Christmas Savings

15 thoughtful gift ideas to delight women in one’s life

How to determine if diamond earrings are real

Advertisement

Toward a framework for selecting indicators of measuring sustainability and circular economy in the agri-food sector: a systematic literature review

• LIFE CYCLE SUSTAINABILITY ASSESSMENT
• Published: 02 March 2022

Cite this article

• Cecilia Silvestri   ORCID: orcid.org/0000-0003-2528-601X 1 ,
• Luca Silvestri   ORCID: orcid.org/0000-0002-6754-899X 2 ,
• Michela Piccarozzi   ORCID: orcid.org/0000-0001-9717-9462 1 &
• Alessandro Ruggieri 1  

2866 Accesses

11 Citations

9 Altmetric

Explore all metrics

A Correction to this article was published on 24 March 2022

This article has been updated

The implementation of sustainability and circular economy (CE) models in agri-food production can promote resource efficiency, reduce environmental burdens, and ensure improved and socially responsible systems. In this context, indicators for the measurement of sustainability play a crucial role. Indicators can measure CE strategies aimed to preserve functions, products, components, materials, or embodied energy. Although there is broad literature describing sustainability and CE indicators, no study offers such a comprehensive framework of indicators for measuring sustainability and CE in the agri-food sector.

Starting from this central research gap, a systematic literature review has been developed to measure the sustainability in the agri-food sector and, based on these findings, to understand how indicators are used and for which specific purposes.

The analysis of the results allowed us to classify the sample of articles in three main clusters (“Assessment-LCA,” “Best practice,” and “Decision-making”) and has shown increasing attention to the three pillars of sustainability (triple bottom line). In this context, an integrated approach of indicators (environmental, social, and economic) offers the best solution to ensure an easier transition to sustainability.

Conclusions

The sample analysis facilitated the identification of new categories of impact that deserve attention, such as the cooperation among stakeholders in the supply chain and eco-innovation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price includes VAT (Russian Federation)

Instant access to the full article PDF.

Rent this article via DeepDyve

Institutional subscriptions

Source: Authors’ elaboration. Notes: The graph shows the temporal distribution of the articles under analysis

Source: Authors’ elaborations. Notes: The graph shows the time distribution of articles from the three major journals

Source: Authors’ elaboration. Notes: The graph shows the composition of the sample according to the three clusters identified by the analysis

Source: Authors’ elaboration. Notes: The graph shows the distribution of articles over time by cluster

Source: Authors’ elaboration. Notes: The graph shows the network visualization

Source: Authors’ elaboration. Notes: The graph shows the overlay visualization

Source: Authors’ elaboration. Notes: The graph shows the classification of articles by scientific field

Source: Authors’ elaboration. Notes: Article classification based on their cluster to which they belong and scientific field

Source: Authors’ elaboration

Source: Authors’ elaboration. Notes: The graph shows the distribution of items over time based on TBL

Source: Authors’ elaboration. Notes: The graph shows the Pareto diagram highlighting the most used indicators in literature for measuring sustainability in the agri-food sector

Source: Authors’ elaboration. Notes: The graph shows the distribution over time of articles divided into conceptual and empirical

Source: Authors’ elaboration. Notes: The graph shows the classification of articles, divided into conceptual and empirical, in-depth analysis

Source: Authors’ elaboration. Notes: The graph shows the geographical distribution of the authors

Source: Authors’ elaboration. Notes: The graph shows the distribution of authors according to the continent from which they originate

Source: Authors’ elaboration. Notes: The graph shows the time distribution of publication of authors according to the continent from which they originate

Source: Authors’ elaboration. Notes: Sustainability measurement indicators and impact categories of LCA, S-LCA, and LCC tools should be integrated in order to provide stakeholders with best practices as guidelines and tools to support both decision-making and measurement, according to the circular economy approach

Similar content being viewed by others

Common Methods and Sustainability Indicators

Transition heuristic frameworks in research on agro-food sustainability transitions

Hamid El Bilali

Research on agro-food sustainability transitions: where are food security and nutrition?

Change history, 24 march 2022.

A Correction to this paper has been published: https://doi.org/10.1007/s11367-022-02038-9

Acero AP, Rodriguez C, Ciroth A (2017) LCIA methods: impact assessment methods in life cycle assessment and their impact categories. Version 1.5.6. Green Delta 1–23

Accorsi R, Versari L, Manzini R (2015) Glass vs. plastic: Life cycle assessment of extra-virgin olive oil bottles across global supply chains. Sustain 7:2818–2840. https://doi.org/10.3390/su7032818

Adjei-Bamfo P, Maloreh-Nyamekye T, Ahenkan A (2019) The role of e-government in sustainable public procurement in developing countries: a systematic literature review. Resour Conserv Recycl 142:189–203. https://doi.org/10.1016/j.resconrec.2018.12.001

Article   Google Scholar  

Aivazidou E, Tsolakis N, Vlachos D, Iakovou E (2015) Water footprint management policies for agrifood supply chains: a critical taxonomy and a system dynamics modelling approach. Chem Eng Trans 43:115–120. https://doi.org/10.3303/CET1543020

Alhaddi H (2015) Triple bottom line and sustainability: a literature review. Bus Manag Stud 1:6–10

Allaoui H, Guo Y, Sarkis J (2019) Decision support for collaboration planning in sustainable supply chains. J Clean Prod 229:761–774. https://doi.org/10.1016/j.jclepro.2019.04.367

Alshqaqeeq F, Amin Esmaeili M, Overcash M, Twomey J (2020) Quantifying hospital services by carbon footprint: a systematic literature review of patient care alternatives. Resour Conserv Recycl 154:104560. https://doi.org/10.1016/j.resconrec.2019.104560

Anwar F, Chaudhry FN, Nazeer S et al (2016) Causes of ozone layer depletion and its effects on human: review. Atmos Clim Sci 06:129–134. https://doi.org/10.4236/acs.2016.61011

Aquilani B, Silvestri C, Ruggieri A (2016). A Systematic Literature Review on Total Quality Management Critical Success Factors and the Identification of New Avenues of Research. https://doi.org/10.1108/TQM-01-2016-0003

Aramyan L, Hoste R, Van Den Broek W et al (2011) Towards sustainable food production: a scenario study of the European pork sector. J Chain Netw Sci 11:177–189. https://doi.org/10.3920/JCNS2011.Qpork8

Arfini F, Antonioli F, Cozzi E et al (2019) Sustainability, innovation and rural development: the case of Parmigiano-Reggiano PDO. Sustain 11:1–17. https://doi.org/10.3390/su11184978

Assembly UG (2005) Resolution adopted by the general assembly. New York, NY

Avilés-Palacios C, Rodríguez-Olalla A (2021) The sustainability of waste management models in circular economies. Sustain 13:1–19. https://doi.org/10.3390/su13137105

Azevedo SG, Silva ME, Matias JCO, Dias GP (2018) The influence of collaboration initiatives on the sustainability of the cashew supply chain. Sustain 10:1–29. https://doi.org/10.3390/su10062075

Bajaj S, Garg R, Sethi M (2016) Total quality management: a critical literature review using Pareto analysis. Int J Product Perform Manag 67:128–154

Banasik A, Kanellopoulos A, Bloemhof-Ruwaard JM, Claassen GDH (2019) Accounting for uncertainty in eco-efficient agri-food supply chains: a case study for mushroom production planning. J Clean Prod 216:249–256. https://doi.org/10.1016/j.jclepro.2019.01.153

Barth H, Ulvenblad PO, Ulvenblad P (2017) Towards a conceptual framework of sustainable business model innovation in the agri-food sector: a systematic literature review. Sustain 9. https://doi.org/10.3390/su9091620

Bastas A, Liyanage K (2018) Sustainable supply chain quality management: a systematic review

Beckerman W (1992) Economic growth and the environment: whose growth? Whose environment? World Dev 20:481–496. https://doi.org/10.1016/0305-750X(92)90038-W

Belaud JP, Prioux N, Vialle C, Sablayrolles C (2019) Big data for agri-food 4.0: application to sustainability management for by-products supply chain. Comput Ind 111:41–50. https://doi.org/10.1016/j.compind.2019.06.006

Bele B, Norderhaug A, Sickel H (2018) Localized agri-food systems and biodiversity. Agric 8. https://doi.org/10.3390/agriculture8020022

Bilali H El, Calabrese G, Iannetta M et al (2020) Environmental sustainability of typical agro-food products: a scientifically sound and user friendly approach. New Medit 19:69–83. https://doi.org/10.30682/nm2002e

Blanc S, Massaglia S, Brun F et al (2019) Use of bio-based plastics in the fruit supply chain: an integrated approach to assess environmental, economic, and social sustainability. Sustain 11. https://doi.org/10.3390/su11092475

Bloemhof JM, van der Vorst JGAJ, Bastl M, Allaoui H (2015) Sustainability assessment of food chain logistics. Int J Logist Res Appl 18:101–117. https://doi.org/10.1080/13675567.2015.1015508

Bonisoli L, Galdeano-Gómez E, Piedra-Muñoz L (2018) Deconstructing criteria and assessment tools to build agri-sustainability indicators and support farmers’ decision-making process. J Clean Prod 182:1080–1094. https://doi.org/10.1016/j.jclepro.2018.02.055

Bonisoli L, Galdeano-Gómez E, Piedra-Muñoz L, Pérez-Mesa JC (2019) Benchmarking agri-food sustainability certifications: evidences from applying SAFA in the Ecuadorian banana agri-system. J Clean Prod 236. https://doi.org/10.1016/j.jclepro.2019.07.054

Bornmann L, Haunschild R, Hug SE (2018) Visualizing the context of citations referencing papers published by Eugene Garfield: a new type of keyword co-occurrence analysis. Scientometrics 114:427–437. https://doi.org/10.1007/s11192-017-2591-8

Boulding KE (1966) The economics of the coming spaceship earth. New York, 1-17

Bracquené E, Dewulf W, Duflou JR (2020) Measuring the performance of more circular complex product supply chains. Resour Conserv Recycl 154:104608. https://doi.org/10.1016/j.resconrec.2019.104608

Burck J, Hagen U, Bals C et al (2021) Climate Change Performance Index

Calisto Friant M, Vermeulen WJV, Salomone R (2020) A typology of circular economy discourses: navigating the diverse visions of a contested paradigm. Resour Conserv Recycl 161:104917. https://doi.org/10.1016/j.resconrec.2020.104917

Campbell BM, Beare DJ, Bennett EM et al (2017) Agriculture production as a major driver of the earth system exceeding planetary boundaries. Ecol Soc 22. https://doi.org/10.5751/ES-09595-220408

Capitanio F, Coppola A, Pascucci S (2010) Product and process innovation in the Italian food industry. Agribusiness 26:503–518. https://doi.org/10.1002/agr.20239

Caputo P, Zagarella F, Cusenza MA et al (2020) Energy-environmental assessment of the UIA-OpenAgri case study as urban regeneration project through agriculture. Sci Total Environ 729:138819. https://doi.org/10.1016/j.scitotenv.2020.138819

Article   CAS   Google Scholar  

Chabowski BR, Mena JA, Gonzalez-Padron TL (2011) The structure of sustainability research in marketing, 1958–2008: a basis for future research opportunities. J Acad Mark Sci 39:55–70. https://doi.org/10.1007/s11747-010-0212-7

Chadegani AA, Salehi H, Yunus M et al (2017) A comparison between two main academic literature collections : Web of Science and Scopus databases. Asian Soc Sci 9:18–26. https://doi.org/10.5539/ass.v9n5p18

Chams N, Guesmi B, Gil JM (2020) Beyond scientific contribution: assessment of the societal impact of research and innovation to build a sustainable agri-food sector. J Environ Manage 264. https://doi.org/10.1016/j.jenvman.2020.110455

Chandrakumar C, McLaren SJ, Jayamaha NP, Ramilan T (2019) Absolute sustainability-based life cycle assessment (ASLCA): a benchmarking approach to operate agri-food systems within the 2°C global carbon budget. J Ind Ecol 23:906–917. https://doi.org/10.1111/jiec.12830

Chaparro-Africano AM (2019) Toward generating sustainability indicators for agroecological markets. Agroecol Sustain Food Syst 43:40–66. https://doi.org/10.1080/21683565.2019.1566192

Colicchia C, Strozzi F (2012) Supply chain risk management: a new methodology for a systematic literature review

Conca L, Manta F, Morrone D, Toma P (2021) The impact of direct environmental, social, and governance reporting: empirical evidence in European-listed companies in the agri-food sector. Bus Strateg Environ 30:1080–1093. https://doi.org/10.1002/bse.2672

Coppola A, Ianuario S, Romano S, Viccaro M (2020) Corporate social responsibility in agri-food firms: the relationship between CSR actions and firm’s performance. AIMS Environ Sci 7:542–558. https://doi.org/10.3934/environsci.2020034

Corona B, Shen L, Reike D et al (2019) Towards sustainable development through the circular economy—a review and critical assessment on current circularity metrics. Resour Conserv Recycl 151:104498. https://doi.org/10.1016/j.resconrec.2019.104498

Correia MS (2019) Sustainability: An overview of the triple bottom line and sustainability implementation. Int J Strateg Eng 2:29–38.  https://doi.org/10.4018/IJoSE.2019010103

Coteur I, Marchand F, Debruyne L, Lauwers L (2019) Structuring the myriad of sustainability assessments in agri-food systems: a case in Flanders. J Clean Prod 209:472–480. https://doi.org/10.1016/j.jclepro.2018.10.066

CREA (2020) L’agricoltura italiana conta 2019

Crenna E, Sala S, Polce C, Collina E (2017) Pollinators in life cycle assessment: towards a framework for impact assessment. J Clean Prod 140:525–536. https://doi.org/10.1016/j.jclepro.2016.02.058

D’Eusanio M, Serreli M, Zamagni A, Petti L (2018) Assessment of social dimension of a jar of honey: a methodological outline. J Clean Prod 199:503–517. https://doi.org/10.1016/j.jclepro.2018.07.157

Dania WAP, Xing K, Amer Y (2018) Collaboration behavioural factors for sustainable agri-food supply chains: a systematic review. J Clean Prod 186:851–864

De Pascale A, Arbolino R, Szopik-Depczyńska K et al (2021) A systematic review for measuring circular economy: the 61 indicators. J Clean Prod 281. https://doi.org/10.1016/j.jclepro.2020.124942

De Schoenmakere M, Gillabel J (2017) Circular by design: products in the circular economy

Del Borghi A, Gallo M, Strazza C, Del Borghi M (2014) An evaluation of environmental sustainability in the food industry through life cycle assessment: the case study of tomato products supply chain. J Clean Prod 78:121–130. https://doi.org/10.1016/j.jclepro.2014.04.083

Del Borghi A, Strazza C, Magrassi F et al (2018) Life cycle assessment for eco-design of product–package systems in the food industry—the case of legumes. Sustain Prod Consum 13:24–36. https://doi.org/10.1016/j.spc.2017.11.001

Denyer D, Tranfield D (2009) Producing a systematic review. In: Buchanan B (ed) The sage handbook of organization research methods. Sage Publications Ltd, Cornwall, pp 671–689

Google Scholar  

Dietz T, Grabs J, Chong AE (2019) Mainstreamed voluntary sustainability standards and their effectiveness: evidence from the Honduran coffee sector. Regul Gov. https://doi.org/10.1111/rego.12239

Dixon-Woods M (2011) Using framework-based synthesis for conducting reviews of qualitative studies. BMC Med 9:9–10. https://doi.org/10.1186/1741-7015-9-39

do Canto NR, Bossle MB, Marques L, Dutra M, (2020) Supply chain collaboration for sustainability: a qualitative investigation of food supply chains in Brazil. Manag Environ Qual an Int J. https://doi.org/10.1108/MEQ-12-2019-0275

dos Santos RR, Guarnieri P (2020) Social gains for artisanal agroindustrial producers induced by cooperation and collaboration in agri-food supply chain. Soc Responsib J. https://doi.org/10.1108/SRJ-09-2019-0323

Doukidis GI, Matopoulos A, Vlachopoulou M, Manthou V, Manos B (2007) A conceptual framework for supply chain collaboration: empirical evidence from the agri‐food industry. Supply Chain Manag an Int Journal 12:177–186. https://doi.org/10.1108/13598540710742491

Durach CF, Kembro J, Wieland A (2017) A new paradigm for systematic literature reviews in supply chain management. J Supply Chain Manag 53:67–85. https://doi.org/10.1111/jscm.12145

Durán-Sánchez A, Álvarez-García J, Río-Rama D, De la Cruz M (2018) Sustainable water resources management: a bibliometric overview. Water 10:1–19. https://doi.org/10.3390/w10091191

Duru M, Therond O (2015) Livestock system sustainability and resilience in intensive production zones: which form of ecological modernization? Reg Environ Chang 15:1651–1665. https://doi.org/10.1007/s10113-014-0722-9

Edison Fondazione (2019) Le eccellenze agricole italiane. I primati europei e mondiali dell’Italia nei prodotti vegetali. Milan (IT)

Ehrenfeld JR (2005) The roots of sustainability. MIT Sloan Manag Rev 46(2)46:23–25

Elia V, Gnoni MG, Tornese F (2017) Measuring circular economy strategies through index methods: a critical analysis. J Clean Prod 142:2741–2751. https://doi.org/10.1016/j.jclepro.2016.10.196

Elkington J (1997) Cannibals with forks : the triple bottom line of 21st century business. Capstone, Oxford

Esposito B, Sessa MR, Sica D, Malandrino O (2020) Towards circular economy in the agri-food sector. A systematic literature review. Sustain 12. https://doi.org/10.3390/SU12187401

European Commission (2018) Agri-food trade in 2018

European Commission (2019) Monitoring EU agri-food trade: development until September 2019

Eurostat (2018) Small and large farms in the EU - statistics from the farm structure survey

FAO (2011) Biodiversity for food and agriculture. Italy, Rome

FAO (2012) Energy-smart food at FAO: an overview. Italy, Rome

FAO (2014) Food wastage footprint: fool cost-accounting

FAO (2016) The state of food and agriculture climate change, agriculture and food security. Italy, Rome

FAO (2017) The future of food and agriculture: trends and challenges. Italy, Rome

FAO (2020) The state of food security and nutrition in the world. Transforming Food Systems for Affordable Healthy Diets. Rome, Italy

Fassio F, Tecco N (2019) Circular economy for food: a systemic interpretation of 40 case histories in the food system in their relationships with SDGs. Systems 7:43. https://doi.org/10.3390/systems7030043

Fathollahi A, Coupe SJ (2021) Life cycle assessment (LCA) and life cycle costing (LCC) of road drainage systems for sustainability evaluation: quantifying the contribution of different life cycle phases. Sci Total Environ 776:145937. https://doi.org/10.1016/j.scitotenv.2021.145937

Ferreira VJ, Arnal ÁJ, Royo P et al (2019) Energy and resource efficiency of electroporation-assisted extraction as an emerging technology towards a sustainable bio-economy in the agri-food sector. J Clean Prod 233:1123–1132. https://doi.org/10.1016/j.jclepro.2019.06.030

Fiksel J (2006) A framework for sustainable remediation. JOM 8:15–22. https://doi.org/10.1021/es202595w

Flick U (2014) An introduction to qualitative research

Franciosi C, Voisin A, Miranda S et al (2020) Measuring maintenance impacts on sustainability of manufacturing industries : from a systematic literature review to a framework proposal. J Clean Prod 260:1–19. https://doi.org/10.1016/j.jclepro.2020.121065

Gaitán-Cremaschi D, Meuwissen MPM, Oude AGJML (2017) Total factor productivity: a framework for measuring agri-food supply chain performance towards sustainability. Appl Econ Perspect Policy 39:259–285. https://doi.org/10.1093/aepp/ppw008

Galdeano-Gómez E, Zepeda-Zepeda JA, Piedra-Muñoz L, Vega-López LL (2017) Family farm’s features influencing socio-economic sustainability: an analysis of the agri-food sector in southeast Spain. New Medit 16:50–61

Gallopín G, Herrero LMJ, Rocuts A (2014) Conceptual frameworks and visual interpretations of sustainability. Int J Sustain Dev 17:298–326. https://doi.org/10.1504/IJSD.2014.064183

Gallopín GC (2003) Sostenibilidad y desarrollo sostenible: un enfoque sistémico. Cepal, LATIN AMERICA

Garnett T (2013) Food sustainability: problems, perspectives and solutions. Proc Nutr Soc 72:29–39. https://doi.org/10.1017/S0029665112002947

Garofalo P, D’Andrea L, Tomaiuolo M et al (2017) Environmental sustainability of agri-food supply chains in Italy: the case of the whole-peeled tomato production under life cycle assessment methodology. J Food Eng 200:1–12. https://doi.org/10.1016/j.jfoodeng.2016.12.007

Gava O, Bartolini F, Venturi F et al (2018) A reflection of the use of the life cycle assessment tool for agri-food sustainability. Sustain 11. https://doi.org/10.3390/su11010071

Gazzola P, Querci E (2017) The connection between the quality of life and sustainable ecological development. Eur Sci J 7881:1857–7431

Geissdoerfer M, Savaget P, Bocken N, Hultink EJ (2017) The circular economy – a new sustainability paradigm ? The circular economy – a new sustainability paradigm ? J Clean Prod 143:757–768. https://doi.org/10.1016/j.jclepro.2016.12.048

Georgescu-Roegen N (1971) The entropy low and the economic process. Harward University Press, Cambridge Mass

Book   Google Scholar  

Gerbens-Leenes PW, Moll HC, Schoot Uiterkamp AJM (2003) Design and development of a measuring method for environmental sustainability in food production systems. Ecol Econ 46:231–248. https://doi.org/10.1016/S0921-8009(03)00140-X

Gésan-Guiziou G, Alaphilippe A, Aubin J et al (2020) Diversity and potentiality of multi-criteria decision analysis methods for agri-food research. Agron Sustain Dev 40. https://doi.org/10.1007/s13593-020-00650-3

Ghisellini P, Cialani C, Ulgiati S (2016) A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems. J Clean Prod 114:11–32. https://doi.org/10.1016/j.jclepro.2015.09.007

Godoy-Durán Á, Galdeano- Gómez E, Pérez-Mesa JC, Piedra-Muñoz L (2017) Assessing eco-efficiency and the determinants of horticultural family-farming in southeast Spain. J Environ Manage 204:594–604. https://doi.org/10.1016/j.jenvman.2017.09.037

Gold S, Kunz N, Reiner G (2017) Sustainable global agrifood supply chains: exploring the barriers. J Ind Ecol 21:249–260. https://doi.org/10.1111/jiec.12440

Goucher L, Bruce R, Cameron DD et al (2017) The environmental impact of fertilizer embodied in a wheat-to-bread supply chain. Nat Plants 3:1–5. https://doi.org/10.1038/nplants.2017.12

Green A, Nemecek T, Chaudhary A, Mathys A (2020) Assessing nutritional, health, and environmental sustainability dimensions of agri-food production. Glob Food Sec 26:100406. https://doi.org/10.1016/j.gfs.2020.100406

Guinée JB, Heijungs R, Huppes G et al (2011) Life cycle assessment: past, present, and future †. Environ Sci Technol 45:90–96. https://doi.org/10.1021/es101316v

Guiomar N, Godinho S, Pinto-Correia T et al (2018) Typology and distribution of small farms in Europe: towards a better picture. Land Use Policy 75:784–798. https://doi.org/10.1016/j.landusepol.2018.04.012

Gunasekaran A, Patel C, McGaughey RE (2004) A framework for supply chain performance measurement. Int J Prod Econ 87:333–347. https://doi.org/10.1016/j.ijpe.2003.08.003

Gunasekaran A, Patel C, Tirtiroglu E (2001) Performance measures and metrics in a supply chain environment. Int J Oper Prod Manag 21:71–87. https://doi.org/10.1108/01443570110358468

Hamam M, Chinnici G, Di Vita G et al (2021) Circular economy models in agro-food systems: a review. Sustain 13

Harun SN, Hanafiah MM, Aziz NIHA (2021) An LCA-based environmental performance of rice production for developing a sustainable agri-food system in Malaysia. Environ Manage 67:146–161. https://doi.org/10.1007/s00267-020-01365-7

Harvey M, Pilgrim S (2011) The new competition for land: food, energy, and climate change. Food Policy 36:S40–S51. https://doi.org/10.1016/j.foodpol.2010.11.009

Hawkes C, Ruel MT (2006) Understanding the links between agriculture and health. DC: International Food Policy Research Institute. Washington, USA

Hellweg S, Milà i Canals L (2014) Emerging approaches, challenges and opportunities in life cycle assessment. Science (80)344:1109LP–1113. https://doi.org/10.1126/science.1248361

Higgins V, Dibden J, Cocklin C (2015) Private agri-food governance and greenhouse gas abatement: constructing a corporate carbon economy. Geoforum 66:75–84. https://doi.org/10.1016/j.geoforum.2015.09.012

Hill T (1995) Manufacturing strategy: text and cases., Macmillan

Hjeresen DD, Gonzales R (2020) Green chemistry promote sustainable agriculture?The rewards are higher yields and less environmental contamination. Environemental Sci Techonology 103–107

Horne R, Grant T, Verghese K (2009) Life cycle assessment: principles, practice, and prospects. Csiro Publishing, Collingwood, Australia

Horton P, Koh L, Guang VS (2016) An integrated theoretical framework to enhance resource efficiency, sustainability and human health in agri-food systems. J Clean Prod 120:164–169. https://doi.org/10.1016/j.jclepro.2015.08.092

Hospido A, Davis J, Berlin J, Sonesson U (2010) A review of methodological issues affecting LCA of novel food products. Int J Life Cycle Assess 15:44–52. https://doi.org/10.1007/s11367-009-0130-4

Huffman T, Liu J, Green M et al (2015) Improving and evaluating the soil cover indicator for agricultural land in Canada. Ecol Indic 48:272–281. https://doi.org/10.1016/j.ecolind.2014.07.008

Ilbery B, Maye D (2005) Food supply chains and sustainability: evidence from specialist food producers in the Scottish/English borders. Land Use Policy 22:331–344. https://doi.org/10.1016/j.landusepol.2004.06.002

Ingrao C, Faccilongo N, Valenti F et al (2019) Tomato puree in the Mediterranean region: an environmental life cycle assessment, based upon data surveyed at the supply chain level. J Clean Prod 233:292–313. https://doi.org/10.1016/j.jclepro.2019.06.056

Iocola I, Angevin F, Bockstaller C et al (2020) An actor-oriented multi-criteria assessment framework to support a transition towards sustainable agricultural systems based on crop diversification. Sustain 12. https://doi.org/10.3390/su12135434

Irabien A, Darton RC (2016) Energy–water–food nexus in the Spanish greenhouse tomato production. Clean Technol Environ Policy 18:1307–1316. https://doi.org/10.1007/s10098-015-1076-9

ISO 14040:2006 (2006) Environmental management — life cycle assessment — principles and framework

ISO 14044:2006 (2006) Environmental management — life cycle assessment — requirements and guidelines

ISO 15392:2008 (2008) Sustainability in building construction–general principles

Istat (2019) Andamento dell’economia agricola

Jaakkola E (2020) Designing conceptual articles : four approaches. AMS Rev 1–9. https://doi.org/10.1007/s13162-020-00161-0

Jin R, Yuan H, Chen Q (2019) Science mapping approach to assisting the review of construction and demolition waste management research published between 2009 and 2018. Resour Conserv Recycl 140:175–188. https://doi.org/10.1016/j.resconrec.2018.09.029

Johnston P, Everard M, Santillo D, Robèrt KH (2007) Reclaiming the definition of sustainability. Environ Sci Pollut Res Int 14:60–66. https://doi.org/10.1065/espr2007.01.375

Jorgensen SE, Burkhard B, Müller F (2013) Twenty volumes of ecological indicators-an accounting short review. Ecol Indic 28:4–9. https://doi.org/10.1016/j.ecolind.2012.12.018

Joshi S, Sharma M, Kler R (2020) Modeling circular economy dimensions in agri-tourism clusters: sustainable performance and future research directions. Int J Math Eng Manag Sci 5:1046–1061. https://doi.org/10.33889/IJMEMS.2020.5.6.080

Kamilaris A, Gao F, Prenafeta-Boldu FX, Ali MI (2017) Agri-IoT: a semantic framework for Internet of Things-enabled smart farming applications. In: 2016 IEEE 3rd World Forum on Internet of Things, WF-IoT 2016. pp 442–447

Karuppusami G, Gandhinathan R (2006) Pareto analysis of critical success factors of total quality management: a literature review and analysis. TQM Mag 18:372–385. https://doi.org/10.1108/09544780610671048

Kates RW, Parris TM, Leiserowitz AA (2005) What is sustainable development? Goals, indicators, values, and practice. Environ Sci Policy Sustain Dev 47:8–21. https://doi.org/10.1080/00139157.2005.10524444

Khounani Z, Hosseinzadeh-Bandbafha H, Moustakas K et al (2021) Environmental life cycle assessment of different biorefinery platforms valorizing olive wastes to biofuel, phosphate salts, natural antioxidant, and an oxygenated fuel additive (triacetin). J Clean Prod 278:123916. https://doi.org/10.1016/j.jclepro.2020.123916

Kitchenham B, Charters S (2007) Guidelines for performing systematic literature reviews in software engineering version 2.3. Engineering 45. https://doi.org/10.1145/1134285.1134500

Korhonen J, Nuur C, Feldmann A, Birkie SE (2018) Circular economy as an essentially contested concept. J Clean Prod 175:544–552. https://doi.org/10.1016/j.jclepro.2017.12.111

Kuisma M, Kahiluoto H (2017) Biotic resource loss beyond food waste: agriculture leaks worst. Resour Conserv Recycl 124:129–140. https://doi.org/10.1016/j.resconrec.2017.04.008

Laso J, Hoehn D, Margallo M et al (2018) Assessing energy and environmental efficiency of the Spanish agri-food system using the LCA/DEA methodology. Energies 11. https://doi.org/10.3390/en11123395

Lee KM (2007) So What is the “triple bottom line”? Int J Divers Organ Communities Nations Annu Rev 6:67–72. https://doi.org/10.18848/1447-9532/cgp/v06i06/39283

Lehmann RJ, Hermansen JE, Fritz M et al (2011) Information services for European pork chains - closing gaps in information infrastructures. Comput Electron Agric 79:125–136. https://doi.org/10.1016/j.compag.2011.09.002

León-Bravo V, Caniato F, Caridi M, Johnsen T (2017) Collaboration for sustainability in the food supply chain: a multi-stage study in Italy. Sustainability 9:1253

Lepage A (2009) The quality of life as attribute of sustainability. TQM J 21:105–115. https://doi.org/10.1108/17542730910938119

Li CZ, Zhao Y, Xiao B et al (2020) Research trend of the application of information technologies in construction and demolition waste management. J Clean Prod 263. https://doi.org/10.1016/j.jclepro.2020.121458

Lo Giudice A, Mbohwa C, Clasadonte MT, Ingrao C (2014) Life cycle assessment interpretation and improvement of the Sicilian artichokes production. Int J Environ Res 8:305–316. https://doi.org/10.22059/ijer.2014.721

Lueddeckens S, Saling P, Guenther E (2020) Temporal issues in life cycle assessment—a systematic review. Int J Life Cycle Assess 25:1385–1401. https://doi.org/10.1007/s11367-020-01757-1

Luo J, Ji C, Qiu C, Jia F (2018) Agri-food supply chain management: bibliometric and content analyses. Sustain 10. https://doi.org/10.3390/su10051573

Lynch J, Donnellan T, Finn JA et al (2019) Potential development of Irish agricultural sustainability indicators for current and future policy evaluation needs. J Environ Manage 230:434–445. https://doi.org/10.1016/j.jenvman.2018.09.070

MacArthur E (2013) Towards the circular economy. J Ind Ecol 2:23–44

MacArthur E (2017) Delivering the circular economy a toolkit for policymakers, The Ellen MacArthur Foundation

MacInnis DJ (2011) A framework for conceptual. J Mark 75:136–154. https://doi.org/10.1509/jmkg.75.4.136

Mangla SK, Luthra S, Rich N et al (2018) Enablers to implement sustainable initiatives in agri-food supply chains. Int J Prod Econ 203:379–393. https://doi.org/10.1016/j.ijpe.2018.07.012

Marotta G, Nazzaro C, Stanco M (2017) How the social responsibility creates value: models of innovation in Italian pasta industry. Int J Glob Small Bus 9:144–167. https://doi.org/10.1504/IJGSB.2017.088923

Martucci O, Arcese G, Montauti C, Acampora A (2019) Social aspects in the wine sector: comparison between social life cycle assessment and VIVA sustainable wine project indicators. Resources 8. https://doi.org/10.3390/resources8020069

Mayring P (2004) Forum : Qualitative social research Sozialforschung 2. History of content analysis. A Companion to Qual Res 1:159–176

McKelvey B (2002) Managing coevolutionary dynamics. In: 18th EGOS Conference. Barcelona, Spain, pp 1–21

McMichael AJ, Butler CD, Folke C (2003) New visions for addressing sustainability. Science (80- ) 302:1191–1920

Mehmood A, Ahmed S, Viza E et al (2021) Drivers and barriers towards circular economy in agri-food supply chain: a review. Bus Strateg Dev 1–17. https://doi.org/10.1002/bsd2.171

Mella P, Gazzola P (2011) Sustainability and quality of life: the development model. In: Kapounek S (ed) Enterprise and competitive environment. Mendel University: Brno, Czechia. 542–551

Merli R, Preziosi M, Acampora A (2018) How do scholars approach the circular economy ? A systematic literature review. J Clean Prod 178:703–722. https://doi.org/10.1016/j.jclepro.2017.12.112

Merli R, Preziosi M, Acampora A et al (2020) Recycled fibers in reinforced concrete: a systematic literature review. J Clean Prod 248:119207. https://doi.org/10.1016/j.jclepro.2019.119207

Miglietta PP, Morrone D (2018) Managing water sustainability: virtual water flows and economic water productivity assessment of the wine trade between Italy and the Balkans. Sustain 10. https://doi.org/10.3390/su10020543

Mitchell MGE, Chan KMA, Newlands NK, Ramankutty N (2020) Spatial correlations don’t predict changes in agricultural ecosystem services: a Canada-wide case study. Front Sustain Food Syst 4:1–17. https://doi.org/10.3389/fsufs.2020.539892

Moraga G, Huysveld S, Mathieux F et al (2019) Circular economy indicators: what do they measure?. Resour Conserv Recycl 146:452–461. https://doi.org/10.1016/j.resconrec.2019.03.045

Morrissey JE, Dunphy NP (2015) Towards sustainable agri-food systems: the role of integrated sustainability and value assessment across the supply-chain. Int J Soc Ecol Sustain Dev 6:41–58. https://doi.org/10.4018/IJSESD.2015070104

Moser G (2009) Quality of life and sustainability: toward person-environment congruity. J Environ Psychol 29:351–357. https://doi.org/10.1016/j.jenvp.2009.02.002

Muijs D (2010) Doing quantitative research in education with SPSS. London

Muller MF, Esmanioto F, Huber N, Loures ER (2019) A systematic literature review of interoperability in the green Building Information Modeling lifecycle. J Clean Prod 223:397–412. https://doi.org/10.1016/j.jclepro.2019.03.114

Muradin M, Joachimiak-Lechman K, Foltynowicz Z (2018) Evaluation of eco-efficiency of two alternative agricultural biogas plants. Appl Sci 8. https://doi.org/10.3390/app8112083

Naseer MA, ur R, Ashfaq M, Hassan S, et al (2019) Critical issues at the upstream level in sustainable supply chain management of agri-food industries: evidence from Pakistan’s citrus industry. Sustain 11:1–19. https://doi.org/10.3390/su11051326

Nattassha R, Handayati Y, Simatupang TM, Siallagan M (2020) Understanding circular economy implementation in the agri-food supply chain: the case of an Indonesian organic fertiliser producer. Agric Food Secur 9:1–16. https://doi.org/10.1186/s40066-020-00264-8

Nazari-Sharabian M, Ahmad S, Karakouzian M (2018) Climate change and eutrophication: a short review. Eng Technol Appl Sci Res 8:3668–3672. https://doi.org/10.5281/zenodo.2532694

Nazir N (2017) Understanding life cycle thinking and its practical application to agri-food system. Int J Adv Sci Eng Inf Technol 7:1861–1870. https://doi.org/10.18517/ijaseit.7.5.3578

Negra C, Remans R, Attwood S et al (2020) Sustainable agri-food investments require multi-sector co-development of decision tools. Ecol Indic 110:105851. https://doi.org/10.1016/j.ecolind.2019.105851

Newsham KK, Robinson SA (2009) Responses of plants in polar regions to UVB exposure: a meta-analysis. Glob Chang Biol 15:2574–2589. https://doi.org/10.1111/j.1365-2486.2009.01944.x

Niemeijer D, de Groot RS (2008) A conceptual framework for selecting environmental indicator sets. Ecol Indic 8:14–25. https://doi.org/10.1016/j.ecolind.2006.11.012

Niero M, Kalbar PP (2019) Coupling material circularity indicators and life cycle based indicators: a proposal to advance the assessment of circular economy strategies at the product level. Resour Conserv Recycl 140:305–312. https://doi.org/10.1016/j.resconrec.2018.10.002

Nikolaou IE, Tsagarakis KP (2021) An introduction to circular economy and sustainability: some existing lessons and future directions. Sustain Prod Consum 28:600–609. https://doi.org/10.1016/j.spc.2021.06.017

Notarnicola B, Hayashi K, Curran MA, Huisingh D (2012) Progress in working towards a more sustainable agri-food industry. J Clean Prod 28:1–8. https://doi.org/10.1016/j.jclepro.2012.02.007

Notarnicola B, Tassielli G, Renzulli PA, Monforti F (2017) Energy flows and greenhouses gases of EU (European Union) national breads using an LCA (life cycle assessment) approach. J Clean Prod 140:455–469. https://doi.org/10.1016/j.jclepro.2016.05.150

Opferkuch K, Caeiro S, Salomone R, Ramos TB (2021) Circular economy in corporate sustainability reporting: a review of organisational approaches. Bus Strateg Environ 1–22. https://doi.org/10.1002/bse.2854

Padilla-Rivera A, do Carmo BBT, Arcese G, Merveille N, (2021) Social circular economy indicators: selection through fuzzy delphi method. Sustain Prod Consum 26:101–110. https://doi.org/10.1016/j.spc.2020.09.015

Pagotto M, Halog A (2016) Towards a circular economy in Australian agri-food industry: an application of input-output oriented approaches for analyzing resource efficiency and competitiveness potential. J Ind Ecol 20:1176–1186. https://doi.org/10.1111/jiec.12373

Parent G, Lavallée S (2011) LCA potentials and limits within a sustainable agri-food statutory framework. Global food insecurity. Springer, Netherlands, Dordrecht, pp 161–171

Chapter   Google Scholar  

Pattey E, Qiu G (2012) Trends in primary particulate matter emissions from Canadian agriculture. J Air Waste Manag Assoc 62:737–747. https://doi.org/10.1080/10962247.2012.672058

Pauliuk S (2018) Critical appraisal of the circular economy standard BS 8001:2017 and a dashboard of quantitative system indicators for its implementation in organizations. Resour Conserv Recycl 129:81–92. https://doi.org/10.1016/j.resconrec.2017.10.019

Peano C, Migliorini P, Sottile F (2014) A methodology for the sustainability assessment of agri-food systems: an application to the slow food presidia project. Ecol Soc 19. https://doi.org/10.5751/ES-06972-190424

Peano C, Tecco N, Dansero E et al (2015) Evaluating the sustainability in complex agri-food systems: the SAEMETH framework. Sustain 7:6721–6741. https://doi.org/10.3390/su7066721

Pearce DW, Turner RK (1990) Economics of natural resources and the environment. Harvester Wheatsheaf, Hemel Hempstead, Herts

Pelletier N (2018) Social sustainability assessment of Canadian egg production facilities: methods, analysis, and recommendations. Sustain 10:1–17. https://doi.org/10.3390/su10051601

Peña C, Civit B, Gallego-Schmid A et al (2021) Using life cycle assessment to achieve a circular economy. Int J Life Cycle Assess 26:215–220. https://doi.org/10.1007/s11367-020-01856-z

Perez Neira D (2016) Energy sustainability of Ecuadorian cacao export and its contribution to climate change. A case study through product life cycle assessment. J Clean Prod 112:2560–2568. https://doi.org/10.1016/j.jclepro.2015.11.003

Pérez-Neira D, Grollmus-Venegas A (2018) Life-cycle energy assessment and carbon footprint of peri-urban horticulture. A comparative case study of local food systems in Spain. Landsc Urban Plan 172:60–68. https://doi.org/10.1016/j.landurbplan.2018.01.001

Pérez-Pons ME, Plaza-Hernández M, Alonso RS et al (2021) Increasing profitability and monitoring environmental performance: a case study in the agri-food industry through an edge-iot platform. Sustain 13:1–16. https://doi.org/10.3390/su13010283

Petti L, Serreli M, Di Cesare S (2018) Systematic literature review in social life cycle assessment. Int J Life Cycle Assess 23:422–431. https://doi.org/10.1007/s11367-016-1135-4

Pieroni MPP, McAloone TC, Pigosso DCA (2019) Business model innovation for circular economy and sustainability: a review of approaches. J Clean Prod 215:198–216. https://doi.org/10.1016/j.jclepro.2019.01.036

Polit DF, Beck CT (2004) Nursing research: principles and methods. Lippincott Williams & Wilkins, Philadelphia, PA

Porkka M, Gerten D, Schaphoff S et al (2016) Causes and trends of water scarcity in food production. Environ Res Lett 11:015001. https://doi.org/10.1088/1748-9326/11/1/015001

Prajapati H, Kant R, Shankar R (2019) Bequeath life to death: state-of-art review on reverse logistics. J Clean Prod 211:503–520. https://doi.org/10.1016/j.jclepro.2018.11.187

Priyadarshini P, Abhilash PC (2020) Policy recommendations for enabling transition towards sustainable agriculture in India. Land Use Policy 96:104718. https://doi.org/10.1016/j.landusepol.2020.104718

Pronti A, Coccia M (2020) Multicriteria analysis of the sustainability performance between agroecological and conventional coffee farms in the East Region of Minas Gerais (Brazil). Renew Agric Food Syst. https://doi.org/10.1017/S1742170520000332

Rabadán A, González-Moreno A, Sáez-Martínez FJ (2019) Improving firms’ performance and sustainability: the case of eco-innovation in the agri-food industry. Sustain 11. https://doi.org/10.3390/su11205590

Raut RD, Luthra S, Narkhede BE et al (2019) Examining the performance oriented indicators for implementing green management practices in the Indian agro sector. J Clean Prod 215:926–943. https://doi.org/10.1016/j.jclepro.2019.01.139

Recanati F, Marveggio D, Dotelli G (2018) From beans to bar: a life cycle assessment towards sustainable chocolate supply chain. Sci Total Environ 613–614:1013–1023. https://doi.org/10.1016/j.scitotenv.2017.09.187

Redclift M (2005) Sustainable development (1987–2005): an oxymoron comes of age. Sustain Dev 13:212–227. https://doi.org/10.1002/sd.281

Rezaei M, Soheilifard F, Keshvari A (2021) Impact of agrochemical emission models on the environmental assessment of paddy rice production using life cycle assessment approach. Energy Sources. Part A Recover Util Environ Eff 1–16

Rigamonti L, Mancini E (2021) Life cycle assessment and circularity indicators. Int J Life Cycle Assess. https://doi.org/10.1007/s11367-021-01966-2

Risku-Norja H, Mäenpää I (2007) MFA model to assess economic and environmental consequences of food production and consumption. Ecol Econ 60:700–711. https://doi.org/10.1016/j.ecolecon.2006.05.001

Ritzén S, Sandström GÖ (2017) Barriers to the circular economy – integration of perspectives and domains. Procedia CIRP 64:7–12. https://doi.org/10.1016/j.procir.2017.03.005

Rockström J, Steffen W, Noone K et al (2009) A safe operating space for humanity. Nature 461:472–475. https://doi.org/10.1038/461472a

Roos Lindgreen E, Mondello G, Salomone R et al (2021) Exploring the effectiveness of grey literature indicators and life cycle assessment in assessing circular economy at the micro level: a comparative analysis. Int J Life Cycle Assess. https://doi.org/10.1007/s11367-021-01972-4

Roselli L, Casieri A, De Gennaro BC et al (2020) Environmental and economic sustainability of table grape production in Italy. Sustain 12.  https://doi.org/10.3390/su12093670

Ross RB, Pandey V, Ross KL (2015) Sustainability and strategy in U.S. agri-food firms: an assessment of current practices. Int Food Agribus Manag Rev 18:17–48

Royo P, Ferreira VJ, López-Sabirón AM, Ferreira G. (2016) Hybrid diagnosis to characterise the energy and environmental enhancement of photovoltaic modules using smart materials. Energy 101:174–189. https://doi.org/10.1016/j.energy.2016.01.101

Ruggerio CA (2021) Sustainability and sustainable development: a review of principles and definitions. Sci Total Environ 786:147481. https://doi.org/10.1016/j.scitotenv.2021.147481

Ruiz-Almeida A, Rivera-Ferre MG (2019) Internationally-based indicators to measure agri-food systems sustainability using food sovereignty as a conceptual framework. Food Secur 11:1321–1337. https://doi.org/10.1007/s12571-019-00964-5

Ryan M, Hennessy T, Buckley C et al (2016) Developing farm-level sustainability indicators for Ireland using the Teagasc National Farm Survey. Irish J Agric Food Res 55:112–125. https://doi.org/10.1515/ijafr-2016-0011

Saade MRM, Yahia A, Amor B (2020) How has LCA been applied to 3D printing ? A systematic literature review and recommendations for future studies. J Clean Prod 244:118803. https://doi.org/10.1016/j.jclepro.2019.118803

Saitone TL, Sexton RJ (2017) Agri-food supply chain: evolution and performance with conflicting consumer and societal demands. Eur Rev Agric Econ 44:634–657. https://doi.org/10.1093/erae/jbx003

Salim N, Ab Rahman MN, Abd Wahab D (2019) A systematic literature review of internal capabilities for enhancing eco-innovation performance of manufacturing firms. J Clean Prod 209:1445–1460. https://doi.org/10.1016/j.jclepro.2018.11.105

Salimi N (2021) Circular economy in agri-food systems BT - strategic decision making for sustainable management of industrial networks. In: International S (ed) Rezaei J. Publishing, Cham, pp 57–70

Salomone R, Ioppolo G (2012) Environmental impacts of olive oil production: a life cycle assessment case study in the province of Messina (Sicily). J Clean Prod 28:88–100. https://doi.org/10.1016/j.jclepro.2011.10.004

Sánchez AD, Río DMDLC, García JÁ (2017) Bibliometric analysis of publications on wine tourism in the databases Scopus and WoS. Eur Res Manag Bus Econ 23:8–15. https://doi.org/10.1016/j.iedeen.2016.02.001

Saputri VHL, Sutopo W, Hisjam M, Ma’aram A (2019) Sustainable agri-food supply chain performance measurement model for GMO and non-GMO using data envelopment analysis method. Appl Sci 9. https://doi.org/10.3390/app9061199

Sassanelli C, Rosa P, Rocca R, Terzi S (2019) Circular economy performance assessment methods : a systematic literature review. J Clean Prod 229:440–453. https://doi.org/10.1016/j.jclepro.2019.05.019

Schiefer S, Gonzalez C, Flanigan S (2015) More than just a factor in transition processes? The role of collaboration in agriculture. In: Sutherland LA, Darnhofer I, Wilson GA, Zagata L (eds) Transition pathways towards sustainability in agriculture: case studies from Europe, CPI Group. Croydon, UK, pp. 83

Seuring S, Muller M (2008) From a literature review to a conceptual framework for sustainable supply chain management. J Clean Prod 16:1699–1710. https://doi.org/10.1016/j.jclepro.2008.04.020

Silvestri C, Silvestri L, Forcina A, et al (2021) Green chemistry contribution towards more equitable global sustainability and greater circular economy: A systematic literature review. J Clean Prod 294. https://doi.org/10.1016/j.jclepro.2021.126137

Smetana S, Schmitt E, Mathys A (2019) Sustainable use of Hermetia illucens insect biomass for feed and food: attributional and consequential life cycle assessment. Resour Conserv Recycl 144:285–296. https://doi.org/10.1016/j.resconrec.2019.01.042

Sonesson U, Berlin J, Ziegler F (2010) Environmental assessment and management in the food industry: life cycle assessment and related approaches. Woodhead Publishing, Cambridge

Soussana JF (2014) Research priorities for sustainable agri-food systems and life cycle assessment. J Clean Prod 73:19–23. https://doi.org/10.1016/j.jclepro.2014.02.061

Soylu A, Oruç C, Turkay M et al (2006) Synergy analysis of collaborative supply chain management in energy systems using multi-period MILP. Eur J Oper Res 174:387–403. https://doi.org/10.1016/j.ejor.2005.02.042

Spaiser V, Ranganathan S, Swain RB, Sumpter DJ (2017) The sustainable development oxymoron: quantifying and modelling the incompatibility of sustainable development goals. Int J Sustain Dev World Ecol 24:457–470. https://doi.org/10.1080/13504509.2016.1235624

Stewart R, Niero M (2018) Circular economy in corporate sustainability strategies: a review of corporate sustainability reports in the fast-moving consumer goods sector. Bus Strateg Environ 27:1005–1022. https://doi.org/10.1002/bse.2048

Stillitano T, Spada E, Iofrida N et al (2021) Sustainable agri-food processes and circular economy pathways in a life cycle perspective: state of the art of applicative research. Sustain 13:1–29. https://doi.org/10.3390/su13052472

Stone J, Rahimifard S (2018) Resilience in agri-food supply chains: a critical analysis of the literature and synthesis of a novel framework. Supply Chain Manag 23:207–238. https://doi.org/10.1108/SCM-06-2017-0201

Strazza C, Del Borghi A, Gallo M, Del Borghi M (2011) Resource productivity enhancement as means for promoting cleaner production: analysis of co-incineration in cement plants through a life cycle approach. J Clean Prod 19:1615–1621. https://doi.org/10.1016/j.jclepro.2011.05.014

Su B, Heshmati A, Geng Y, Yu X (2013) A review of the circular economy in China: moving from rhetoric to implementation. J Clean Prod 42:215–227. https://doi.org/10.1016/j.jclepro.2012.11.020

Suárez-Eiroa B, Fernández E, Méndez-Martínez G, Soto-Oñate D (2019) Operational principles of circular economy for sustainable development: linking theory and practice. J Clean Prod 214:952–961. https://doi.org/10.1016/j.jclepro.2018.12.271

Svensson G, Wagner B (2015) Implementing and managing economic, social and environmental efforts of business sustainability. Manag Environ Qual an Int Journal 26:195–213. https://doi.org/10.1108/MEQ-09-2013-0099

Tasca AL, Nessi S, Rigamonti L (2017) Environmental sustainability of agri-food supply chains: an LCA comparison between two alternative forms of production and distribution of endive in northern Italy. J Clean Prod 140:725–741. https://doi.org/10.1016/j.jclepro.2016.06.170

Tassielli G, Notarnicola B, Renzulli PA, Arcese G (2018) Environmental life cycle assessment of fresh and processed sweet cherries in southern Italy. J Clean Prod 171:184–197. https://doi.org/10.1016/j.jclepro.2017.09.227

Teixeira R, Pax S (2011) A survey of life cycle assessment practitioners with a focus on the agri-food sector. J Ind Ecol 15:817–820. https://doi.org/10.1111/j.1530-9290.2011.00421.x

Tobergte DR, Curtis S (2013) ILCD Handbook. J Chem Info Model. https://doi.org/10.278/33030

Tortorella MM, Di Leo S, Cosmi C et al (2020) A methodological integrated approach to analyse climate change effects in agri-food sector: the TIMES water-energy-food module. Int J Environ Res Public Health 17:1–21. https://doi.org/10.3390/ijerph17217703

Tranfield D, Denyer D, Smart P (2003) Towards a methodology for developing evidenceinformed management knowledge by means of systematic review. Br J Manag 14:207–222

Trivellas P, Malindretos G, Reklitis P (2020) Implications of green logistics management on sustainable business and supply chain performance: evidence from a survey in the greek agri-food sector. Sustain 12:1–29. https://doi.org/10.3390/su122410515

Tsangas M, Gavriel I, Doula M et al (2020) Life cycle analysis in the framework of agricultural strategic development planning in the Balkan region. Sustain 12:1–15. https://doi.org/10.3390/su12051813

Ülgen VS, Björklund M, Simm N (2019) Inter-organizational supply chain interaction for sustainability : a systematic literature review.

UNEP S (2020) Guidelines for social life cycle assessment of products and organizations 2020.

UNEP/SETAC (2009) United Nations Environment Programme-society of Environmental Toxicology and Chemistry. Guidelines for social life cycle assessment of products. France

United Nations (2011) Guiding principles on business and human rights. Implementing the United Nations “protect, respect and remedy” framework

United Nations (2015) Transforming our world: the 2030 agenda for sustainable development. sustainabledevelopment.un.org

Van Asselt ED, Van Bussel LGJ, Van Der Voet H et al (2014) A protocol for evaluating the sustainability of agri-food production systems - a case study on potato production in peri-urban agriculture in the Netherlands. Ecol Indic 43:315–321. https://doi.org/10.1016/j.ecolind.2014.02.027

Van der Ploeg JD (2014) Peasant-driven agricultural growth and food sovereignty. J Peasant Stud 41:999–1030. https://doi.org/10.1080/03066150.2013.876997

van Eck NJ, Waltman L (2010) Software survey: VOSviewer, a computer program for bibliometric mapping. Scientometrics 84:523–538. https://doi.org/10.1007/s11192-009-0146-3

Van Eck NJ, Waltman L (2019) Manual for VOSviwer version 1.6.10. CWTS Meaningful metrics 1–53

Vasa L, Angeloska A, Trendov NM (2017) Comparative analysis of circular agriculture development in selected Western Balkan countries based on sustainable performance indicators. Econ Ann 168:44–47. https://doi.org/10.21003/ea.V168-09

Verdecho MJ, Alarcón-Valero F, Pérez-Perales D et al (2020) A methodology to select suppliers to increase sustainability within supply chains. Cent Eur J Oper Res. https://doi.org/10.1007/s10100-019-00668-3

Vergine P, Salerno C, Libutti A et al (2017) Closing the water cycle in the agro-industrial sector by reusing treated wastewater for irrigation. J Clean Prod 164:587–596. https://doi.org/10.1016/j.jclepro.2017.06.239

WCED (1987) Our common future - call for action

Webster K (2013) What might we say about a circular economy? Some temptations to avoid if possible. World Futures 69:542–554

Wheaton E, Kulshreshtha S (2013) Agriculture and climate change: implications for environmental sustainability indicators. WIT Trans Ecol Environ 175:99–110. https://doi.org/10.2495/ECO130091

Wijewickrama MKCS, Chileshe N, Rameezdeen R, Ochoa JJ (2021) Information sharing in reverse logistics supply chain of demolition waste: a systematic literature review. J Clean Prod 280:124359. https://doi.org/10.1016/j.jclepro.2020.124359

Woodhouse A, Davis J, Pénicaud C, Östergren K (2018) Sustainability checklist in support of the design of food processing. Sustain Prod Consum 16:110–120. https://doi.org/10.1016/j.spc.2018.06.008

Wu R, Yang D, Chen J (2014) Social Life Cycle Assessment Revisited Sustain 6:4200–4226. https://doi.org/10.3390/su6074200

Yadav S, Luthra S, Garg D (2021) Modelling Internet of things (IoT)-driven global sustainability in multi-tier agri-food supply chain under natural epidemic outbreaks. Environ Sci Pollut Res 16633–16654. https://doi.org/10.1007/s11356-020-11676-1

Yee FM, Shaharudin MR, Ma G et al (2021) Green purchasing capabilities and practices towards Firm’s triple bottom line in Malaysia. J Clean Prod 307:127268. https://doi.org/10.1016/j.jclepro.2021.127268

Yigitcanlar T (2010) Rethinking sustainable development: urban management, engineering, and design. IGI Global

Zamagni A, Amerighi O, Buttol P (2011) Strengths or bias in social LCA? Int J Life Cycle Assess 16:596–598. https://doi.org/10.1007/s11367-011-0309-3

Download references

Author information

Authors and affiliations.

Department of Economy, Engineering, Society and Business Organization, University of “Tuscia, ” Via del Paradiso 47, 01100, Viterbo, VT, Italy

Cecilia Silvestri, Michela Piccarozzi & Alessandro Ruggieri

Department of Engineering, University of Rome “Niccolò Cusano, ” Via Don Carlo Gnocchi, 3, 00166, Rome, Italy

Luca Silvestri

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Cecilia Silvestri .

Ethics declarations

Competing interests.

The authors declare no competing interests.

Additional information

Communicated by Monia Niero

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

The original online version of this article was revised: a number of ill-placed paragraph headings were removed and the source indication "Authors' elaborations" was added to Tables 1-3.

Supplementary Information

Below is the link to the electronic supplementary material.

Supplementary file1 (DOCX 31 KB)

Rights and permissions.

Reprints and permissions

About this article

Silvestri, C., Silvestri, L., Piccarozzi, M. et al. Toward a framework for selecting indicators of measuring sustainability and circular economy in the agri-food sector: a systematic literature review. Int J Life Cycle Assess (2022). https://doi.org/10.1007/s11367-022-02032-1

Download citation

Received : 15 June 2021

Accepted : 16 February 2022

Published : 02 March 2022

DOI : https://doi.org/10.1007/s11367-022-02032-1

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Agri-food sector
• Sustainability
• Circular economy
• Triple bottom line
• Life cycle assessment
• Find a journal
• Publish with us
• Track your research